NN31 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3148 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3148 double-row cylindrical roller bearing: 240 mm bore (d), 400 mm outside diameter (D), 128 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 240 mmD 400 mmB/C 128 mmCr 1170 kNMass 64.2 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 240D 400B 128

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d240 mm
Outside diameter D400 mm
Mass64.2 kg
Catalogue dynamic load Cr1170 kN
Catalogue static load Cor2040 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da376 mm
Abutment dimension da262 mm
Minimum chamfer r124 mm
Minimum chamfer r344 mm
Maximum fillet ra3 mm
Maximum fillet rb3 mm
Catalogue speed (see source conditions) speed1400 rpm
Shared B/C dimension (catalogue column) BC128 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3148?

The NN3148 catalogue lists da min = 262 mm; Da max = 376 mm; ra max = 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3148?

The catalogue reference mass for NN3148 is 64.2 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3148?

In the ZQM General Catalogue, NN3148 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1170 kN, C0r 2040 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3148 double-row cylindrical roller bearing?

NN3148 (240 × 400 × 128 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Other Bearing Series with 240 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
61848MADeep Groove Ball Bearing240 × 300 × 28 mm

Compare alternative series sharing the same 240 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3148

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top