NN31 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING
NN3156 Double-Row Cylindrical Roller Bearing Dimensions & Specifications
NN3156 double-row cylindrical roller bearing: 280 mm bore (d), 460 mm outside diameter (D), 146 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 280 mm |
|---|---|
| Outside diameter D | 460 mm |
| Mass | 95.7 kg |
| Catalogue dynamic load Cr | 1520 kN |
| Catalogue static load Cor | 2790 kN |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da | 431 mm |
|---|---|
| Abutment dimension da | 306 mm |
| Minimum chamfer r12 | 5 mm |
| Minimum chamfer r34 | 5 mm |
| Maximum fillet ra | 4 mm |
| Maximum fillet rb | 4 mm |
| Catalogue speed (see source conditions) speed | 1200 rpm |
| Shared B/C dimension (catalogue column) BC | 146 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NN3156?
The NN3156 catalogue lists da min = 306 mm; Da max = 431 mm; ra max = 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of NN3156?
The catalogue reference mass for NN3156 is 95.7 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
What are the main dimensions and load ratings of NN3156?
In the ZQM General Catalogue, NN3156 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1520 kN, C0r 2790 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.
What rib and bore features define NN3156 double-row cylindrical roller bearing?
NN3156 (280 × 460 × 146 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
DIRECT FACTORY SOURCING
Request a Quote for NN3156
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

