NN31 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3152 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3152 double-row cylindrical roller bearing: 260 mm bore (d), 440 mm outside diameter (D), 144 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 260 mmD 440 mmB/C 144 mmCr 1480 kNMass 89.1 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 260D 440B 144

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d260 mm
Outside diameter D440 mm
Mass89.1 kg
Catalogue dynamic load Cr1480 kN
Catalogue static load Cor2660 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da415 mm
Abutment dimension da282 mm
Minimum chamfer r124 mm
Minimum chamfer r344 mm
Maximum fillet ra3 mm
Maximum fillet rb3 mm
Catalogue speed (see source conditions) speed1300 rpm
Shared B/C dimension (catalogue column) BC144 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3152?

The NN3152 catalogue lists da min = 282 mm; Da max = 415 mm; ra max = 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3152?

The catalogue reference mass for NN3152 is 89.1 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3152?

In the ZQM General Catalogue, NN3152 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1480 kN, C0r 2660 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3152 double-row cylindrical roller bearing?

NN3152 (260 × 440 × 144 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3152

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top