NN31 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3176 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3176 double-row cylindrical roller bearing: 380 mm bore (d), 620 mm outside diameter (D), 194 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 380 mmD 620 mmB/C 194 mmCr 2620 kNMass 224 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 380D 620B 194

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d380 mm
Outside diameter D620 mm
Mass224 kg
Catalogue dynamic load Cr2620 kN
Catalogue static load Cor4950 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da588 mm
Abutment dimension da408 mm
Minimum chamfer r125 mm
Minimum chamfer r345 mm
Maximum fillet ra4 mm
Maximum fillet rb4 mm
Catalogue speed (see source conditions) speed850 rpm
Shared B/C dimension (catalogue column) BC194 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3176?

The NN3176 catalogue lists da min = 408 mm; Da max = 588 mm; ra max = 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3176?

The catalogue reference mass for NN3176 is 224 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3176?

In the ZQM General Catalogue, NN3176 has nominal boundary dimensions of Array. Catalog load ratings: Cr 2620 kN, C0r 4950 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3176 double-row cylindrical roller bearing?

NN3176 (380 × 620 × 194 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3176

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top