NN31 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3192 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3192 double-row cylindrical roller bearing: 460 mm bore (d), 720 mm outside diameter (D), 226 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 460 mmD 720 mmB/C 226 mmCr 3500 kNMass 357 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 460D 720B 226

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d460 mm
Outside diameter D720 mm
Mass357 kg
Catalogue dynamic load Cr3500 kN
Catalogue static load Cor6800 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da680 mm
Abutment dimension da476 mm
Minimum chamfer r126 mm
Minimum chamfer r346 mm
Maximum fillet ra5 mm
Maximum fillet rb5 mm
Catalogue speed (see source conditions) speed750 rpm
Shared B/C dimension (catalogue column) BC226 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3192?

The NN3192 catalogue lists da min = 476 mm; Da max = 680 mm; ra max = 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3192?

The catalogue reference mass for NN3192 is 357 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3192?

In the ZQM General Catalogue, NN3192 has nominal boundary dimensions of Array. Catalog load ratings: Cr 3500 kN, C0r 6800 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3192 double-row cylindrical roller bearing?

NN3192 (460 × 720 × 226 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3192

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top