NN31 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3196 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3196 double-row cylindrical roller bearing: 480 mm bore (d), 790 mm outside diameter (D), 248 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 480 mmD 790 mmB/C 248 mmCr 4050 kNMass 447 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 480D 790B 248

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d480 mm
Outside diameter D790 mm
Mass447 kg
Catalogue dynamic load Cr4050 kN
Catalogue static load Cor8100 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da742 mm
Abutment dimension da523 mm
Minimum chamfer r127.5 mm
Minimum chamfer r347.5 mm
Maximum fillet ra6 mm
Maximum fillet rb6 mm
Catalogue speed (see source conditions) speed630 rpm
Shared B/C dimension (catalogue column) BC248 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3196?

The NN3196 catalogue lists da min = 523 mm; Da max = 742 mm; ra max = 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3196?

The catalogue reference mass for NN3196 is 447 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3196?

In the ZQM General Catalogue, NN3196 has nominal boundary dimensions of Array. Catalog load ratings: Cr 4050 kN, C0r 8100 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3196 double-row cylindrical roller bearing?

NN3196 (480 × 790 × 248 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3196

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top