NN39 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3952 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3952 double-row cylindrical roller bearing: 260 mm bore (d), 360 mm outside diameter (D), 75 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 260 mmD 360 mmB/C 75 mmCr 670 kNMass 21.4 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 260D 360B 75

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d260 mm
Outside diameter D360 mm
Mass21.4 kg
Catalogue dynamic load Cr670 kN
Catalogue static load Cor1380 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da342 mm
Abutment dimension da277 mm
Minimum chamfer r122.1 mm
Minimum chamfer r342.1 mm
Maximum fillet ra2 mm
Maximum fillet rb2 mm
Catalogue speed (see source conditions) speed2400 rpm
Shared B/C dimension (catalogue column) BC75 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3952?

The NN3952 catalogue lists da min = 277 mm; Da max = 342 mm; ra max = 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3952?

The catalogue reference mass for NN3952 is 21.4 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3952?

In the ZQM General Catalogue, NN3952 has nominal boundary dimensions of Array. Catalog load ratings: Cr 670 kN, C0r 1380 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3952 double-row cylindrical roller bearing?

NN3952 (260 × 360 × 75 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3952

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top