NN39 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING
NN3956 Double-Row Cylindrical Roller Bearing Dimensions & Specifications
NN3956 double-row cylindrical roller bearing: 280 mm bore (d), 380 mm outside diameter (D), 75 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 280 mm |
|---|---|
| Outside diameter D | 380 mm |
| Mass | 22.7 kg |
| Catalogue dynamic load Cr | 695 kN |
| Catalogue static load Cor | 1460 kN |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da | 361 mm |
|---|---|
| Abutment dimension da | 297 mm |
| Minimum chamfer r12 | 2.1 mm |
| Minimum chamfer r34 | 2.1 mm |
| Maximum fillet ra | 2 mm |
| Maximum fillet rb | 2 mm |
| Catalogue speed (see source conditions) speed | 2200 rpm |
| Shared B/C dimension (catalogue column) BC | 75 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NN3956?
The NN3956 catalogue lists da min = 297 mm; Da max = 361 mm; ra max = 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of NN3956?
The catalogue reference mass for NN3956 is 22.7 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
What are the main dimensions and load ratings of NN3956?
In the ZQM General Catalogue, NN3956 has nominal boundary dimensions of Array. Catalog load ratings: Cr 695 kN, C0r 1460 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.
What rib and bore features define NN3956 double-row cylindrical roller bearing?
NN3956 (280 × 380 × 75 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
DIRECT FACTORY SOURCING
Request a Quote for NN3956
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

