NN40 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN40/560 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN40/560 double-row cylindrical roller bearing: 560 mm bore (d), 820 mm outside diameter (D), 258 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 560 mmD 820 mmB/C 258 mmCr 4100 kNMass 472 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 560D 820B 258

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d560 mm
Outside diameter D820 mm
Mass472 kg
Catalogue dynamic load Cr4100 kN
Catalogue static load Cor10600 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da778 mm
Abutment dimension da598 mm
Minimum chamfer r126 mm
Minimum chamfer r346 mm
Maximum fillet ra5 mm
Maximum fillet rb5 mm
Catalogue speed (see source conditions) speed630 rpm
Shared B/C dimension (catalogue column) BC258 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN40/560?

The NN40/560 catalogue lists da min = 598 mm; Da max = 778 mm; ra max = 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN40/560?

The catalogue reference mass for NN40/560 is 472 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN40/560?

In the ZQM General Catalogue, NN40/560 has nominal boundary dimensions of Array. Catalog load ratings: Cr 4100 kN, C0r 10600 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN40/560 double-row cylindrical roller bearing?

NN40/560 (560 × 820 × 258 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN40/560

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top