NN40 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN4084 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN4084 double-row cylindrical roller bearing: 420 mm bore (d), 620 mm outside diameter (D), 200 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 420 mmD 620 mmB/C 200 mmCr 3150 kNMass 189 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 420D 620B 200

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d420 mm
Outside diameter D620 mm
Mass189 kg
Catalogue dynamic load Cr3150 kN
Catalogue static load Cor7100 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da588 mm
Abutment dimension da449 mm
Minimum chamfer r125 mm
Minimum chamfer r345 mm
Maximum fillet ra4 mm
Maximum fillet rb4 mm
Catalogue speed (see source conditions) speed900 rpm
Shared B/C dimension (catalogue column) BC200 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN4084?

The NN4084 catalogue lists da min = 449 mm; Da max = 588 mm; ra max = 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN4084?

The catalogue reference mass for NN4084 is 189 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN4084?

In the ZQM General Catalogue, NN4084 has nominal boundary dimensions of Array. Catalog load ratings: Cr 3150 kN, C0r 7100 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN4084 double-row cylindrical roller bearing?

NN4084 (420 × 620 × 200 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN4084

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top