NN40 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN4038 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN4038 double-row cylindrical roller bearing: 190 mm bore (d), 290 mm outside diameter (D), 100 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 190 mmD 290 mmB/C 100 mmCr 825 kNMass 24 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 190D 290B 100

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d190 mm
Outside diameter D290 mm
Mass24 kg
Catalogue dynamic load Cr825 kN
Catalogue static load Cor1640 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da273 mm
Abutment dimension da206 mm
Minimum chamfer r122.1 mm
Minimum chamfer r342.1 mm
Maximum fillet ra2 mm
Maximum fillet rb2 mm
Catalogue speed (see source conditions) speed3000 rpm
Shared B/C dimension (catalogue column) BC100 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN4038?

The NN4038 catalogue lists da min = 206 mm; Da max = 273 mm; ra max = 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN4038?

The catalogue reference mass for NN4038 is 24 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN4038?

In the ZQM General Catalogue, NN4038 has nominal boundary dimensions of Array. Catalog load ratings: Cr 825 kN, C0r 1640 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN4038 double-row cylindrical roller bearing?

NN4038 (190 × 290 × 100 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Other Bearing Series with 190 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
NU2838MCylindrical Roller Bearing190 × 240 × 30 mm

Compare alternative series sharing the same 190 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN4038

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top