NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN49/1320 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN49/1320 double-row cylindrical roller bearing: 1320 mm bore (d), 1720 mm outside diameter (D), 400 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 1320 mmD 1720 mmB/C 400 mmCr 13800 kNMass 3060 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 1320D 1720B 400

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d1320 mm
Outside diameter D1720 mm
Mass3060 kg
Catalogue dynamic load Cr13800 kN
Catalogue static load Cor42500 kN
Mounting dimensions & additional parameters (7)
Abutment dimension Da1687 mm
Minimum chamfer r127.5 mm
Minimum chamfer r347.5 mm
Maximum fillet ra6 mm
Maximum fillet rb6 mm
Catalogue speed (see source conditions) speed230 rpm
Shared B/C dimension (catalogue column) BC400 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN49/1320?

The NN49/1320 catalogue lists Da max = 1687 mm; ra max = 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN49/1320?

The catalogue reference mass for NN49/1320 is 3060 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN49/1320?

In the ZQM General Catalogue, NN49/1320 has nominal boundary dimensions of Array. Catalog load ratings: Cr 13800 kN, C0r 42500 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN49/1320 double-row cylindrical roller bearing?

NN49/1320 (1320 × 1720 × 400 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Other Bearing Series with 1320 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
248/1320CAF3/W33Spherical Roller Bearing1320 × 1600 × 280 mm
NU18/1320Cylindrical Roller Bearing1320 × 1600 × 122 mm
618/1320F1Deep Groove Ball Bearing1320 × 1600 × 122 mm
NUP18/1320Cylindrical Roller Bearing1320 × 1600 × 122 mm

Compare alternative series sharing the same 1320 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN49/1320

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top