NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN49/1000 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN49/1000 double-row cylindrical roller bearing: 1000 mm bore (d), 1320 mm outside diameter (D), 315 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 1000 mmD 1320 mmB/C 315 mmCr 8580 kNMass 1200 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 1000D 1320B 315

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d1000 mm
Outside diameter D1320 mm
Mass1200 kg
Catalogue dynamic load Cr8580 kN
Catalogue static load Cor26000 kN
Mounting dimensions & additional parameters (7)
Abutment dimension Da1287 mm
Minimum chamfer r127.5 mm
Minimum chamfer r347.5 mm
Maximum fillet ra6 mm
Maximum fillet rb6 mm
Catalogue speed (see source conditions) speed300 rpm
Shared B/C dimension (catalogue column) BC315 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN49/1000?

The NN49/1000 catalogue lists Da max = 1287 mm; ra max = 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN49/1000?

The catalogue reference mass for NN49/1000 is 1200 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN49/1000?

In the ZQM General Catalogue, NN49/1000 has nominal boundary dimensions of Array. Catalog load ratings: Cr 8580 kN, C0r 26000 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN49/1000 double-row cylindrical roller bearing?

NN49/1000 (1000 × 1320 × 315 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN49/1000

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top