NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN4926 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN4926 double-row cylindrical roller bearing: 130 mm bore (d), 180 mm outside diameter (D), 50 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 130 mmD 180 mmB/C 50 mmCr 187 kNMass 3.84 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 130D 180B 50

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d130 mm
Outside diameter D180 mm
Mass3.84 kg
Catalogue dynamic load Cr187 kN
Catalogue static load Cor390 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da169 mm
Abutment dimension da141 mm
Minimum chamfer r121.5 mm
Minimum chamfer r341.5 mm
Maximum fillet ra1.5 mm
Maximum fillet rb1.5 mm
Catalogue speed (see source conditions) speed4800 rpm
Shared B/C dimension (catalogue column) BC50 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN4926?

The NN4926 catalogue lists da min = 141 mm; Da max = 169 mm; ra max = 1.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN4926?

The catalogue reference mass for NN4926 is 3.84 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN4926?

In the ZQM General Catalogue, NN4926 has nominal boundary dimensions of Array. Catalog load ratings: Cr 187 kN, C0r 390 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN4926 double-row cylindrical roller bearing?

NN4926 (130 × 180 × 50 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN4926

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top