NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN4928 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN4928 double-row cylindrical roller bearing: 140 mm bore (d), 190 mm outside diameter (D), 50 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 140 mmD 190 mmB/C 50 mmCr 190 kNMass 4.07 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 140D 190B 50

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d140 mm
Outside diameter D190 mm
Mass4.07 kg
Catalogue dynamic load Cr190 kN
Catalogue static load Cor400 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da179 mm
Abutment dimension da151 mm
Minimum chamfer r121.5 mm
Minimum chamfer r341.5 mm
Maximum fillet ra1.5 mm
Maximum fillet rb1.5 mm
Catalogue speed (see source conditions) speed4500 rpm
Shared B/C dimension (catalogue column) BC50 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN4928?

The NN4928 catalogue lists da min = 151 mm; Da max = 179 mm; ra max = 1.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN4928?

The catalogue reference mass for NN4928 is 4.07 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN4928?

In the ZQM General Catalogue, NN4928 has nominal boundary dimensions of Array. Catalog load ratings: Cr 190 kN, C0r 400 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN4928 double-row cylindrical roller bearing?

NN4928 (140 × 190 × 50 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN4928

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top