NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN4956 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN4956 double-row cylindrical roller bearing: 280 mm bore (d), 380 mm outside diameter (D), 100 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 280 mmD 380 mmB/C 100 mmCr 765 kNMass 32.9 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 280D 380B 100

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d280 mm
Outside diameter D380 mm
Mass32.9 kg
Catalogue dynamic load Cr765 kN
Catalogue static load Cor1800 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da361 mm
Abutment dimension da297 mm
Minimum chamfer r122.1 mm
Minimum chamfer r342.1 mm
Maximum fillet ra2 mm
Maximum fillet rb2 mm
Catalogue speed (see source conditions) speed1600 rpm
Shared B/C dimension (catalogue column) BC100 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN4956?

The NN4956 catalogue lists da min = 297 mm; Da max = 361 mm; ra max = 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN4956?

The catalogue reference mass for NN4956 is 32.9 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN4956?

In the ZQM General Catalogue, NN4956 has nominal boundary dimensions of Array. Catalog load ratings: Cr 765 kN, C0r 1800 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN4956 double-row cylindrical roller bearing?

NN4956 (280 × 380 × 100 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN4956

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top