NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN4960 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN4960 double-row cylindrical roller bearing: 300 mm bore (d), 420 mm outside diameter (D), 118 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 300 mmD 420 mmB/C 118 mmCr 1020 kNMass 51.6 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 300D 420B 118

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d300 mm
Outside diameter D420 mm
Mass51.6 kg
Catalogue dynamic load Cr1020 kN
Catalogue static load Cor2360 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da398 mm
Abutment dimension da320 mm
Minimum chamfer r123 mm
Minimum chamfer r343 mm
Maximum fillet ra2.5 mm
Maximum fillet rb2.5 mm
Catalogue speed (see source conditions) speed2000 rpm
Shared B/C dimension (catalogue column) BC118 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN4960?

The NN4960 catalogue lists da min = 320 mm; Da max = 398 mm; ra max = 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN4960?

The catalogue reference mass for NN4960 is 51.6 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN4960?

In the ZQM General Catalogue, NN4960 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1020 kN, C0r 2360 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN4960 double-row cylindrical roller bearing?

NN4960 (300 × 420 × 118 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN4960

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top