GE35ES-2RS Spherical Plain Bearing 35 × 55 × 25/20 mm

GE35ES-2RS sealed steel-on-steel radial spherical plain bearing (ISO 12240-1 Series E, 35 × 55 × 25/20 mm) suited for mobile aerial work platform (boom lift) basket-leveling cylinder clevis eyes requiring vibration-resistant static holding and anti-fretting protection.

Request a Quote

Built in accordance with ISO 12240-1 Dimension Series E, the GE35ES-2RS (GE 35 ES-2RS) sealed radial spherical plain bearing pairs a 35 mm pin bore with a 55 mm housing outside diameter, combining a 25 mm inner-ring width (B) and a 20 mm outer-ring width (C). Featuring hardened bearing-steel sliding contact treated with phosphate and molybdenum disulfide (MoS₂), relubrication channels in both rings, and twin -2RS contact lip seals, it delivers dependable static basket holding and smooth micro-oscillation inside mobile aerial work platform (telescopic and articulating boom lift) leveling cylinder clevis eyes.

GE35ES-2RS ISO 12240-1 Boundary Dimensions Summary

Specification Item ISO 12240-1 Series E Value Design & Inspection Note
Bearing Code GE35ES-2RS Sealed steel-on-steel radial spherical plain bearing
Inner Bore Diameter (d) 35 mm Nominal hardened leveling-pin diameter
Outer Diameter (D) 55 mm Nominal clevis eye seating bore
Inner Ring Width (B) 25 mm Spherical ball width between clevis spacers
Outer Ring Width (C) 20 mm Single-fractured outer ring seating length
Sliding Contact Pair Hardened steel-on-steel Phosphate + MoS₂ running-in treatment; periodic EP grease service required
Sealing & Relubrication -2RS lip seals + ES oil grooves Double-sided weather seals; annular grooves & grease holes in both rings
Load Capacity, Clearance & Tilt Factory drawing verified Exact sliding load ratings, radial clearance & tilt angle issued upon formal quotation

Static Holding, Micro-Oscillation Fretting & 90° Split Rule

When an elevated boom lift parks 20 meters above a steelwork deck or façade jobsite, its master-slave hydraulic leveling cylinders hold operator basket posture nearly stationary while wind gusts and operator footsteps transmit continuous tiny angular tremors across the 35 mm pin. Because sliding wear in spherical plain joints follows contact pressure × sliding speed (p·v)—and micro-amplitude vibration can squeeze oil out of stationary contact zones—the phosphated MoS₂ surface film acts as an anti-fretting cushion against false brinelling and jerky basket chatter.

To admit the solid inner sphere during manufacturing, the hardened outer ring contains a single radial fracture. Aerial-lift OEM assemblers and rental-fleet technicians pressing GE35ES-2RS into a leveling clevis must position that fracture exactly 90° away from the vertical basket-holding load axis, keeping the seam in the zero-pressure lateral zone so static holding stress never pries the split apart.

Boom Lift Weatherproofing & Cylinder-Rod Alignment

Rental-fleet aerial platforms live outdoors year-round across concrete curing yards, coastal shipyards, and abrasive masonry facades, enduring windblown cement powder, rain, and high-pressure rental-yard washdowns. Twin -2RS elastomer lip seals maintain intimate wiping contact over the spherical inner ball across boom elevation arcs, blocking mortar dust and rainwater from seizing the safety-critical leveling pivot.

Meanwhile, the 5 mm width step between inner ring (25 mm) and outer ring (20 mm) absorbs elastic deflection of long telescopic boom sections under full outreach, preventing structural droop from bending the leveling cylinder rod or scoring hydraulic gland seals.

Fleet Inspection & Anti-Fretting Relubrication Protocol

Because boom-lift leveling joints operate mostly at very small oscillation angles, static grease can channel away from the loaded hemisphere if left unpurged between annual inspections. During quarterly rental-fleet maintenance, cycle the basket leveling control through full up/down tilt while pumping fresh NLGI 2 MoS₂-fortified EP grease into the ES oil groove so solid lubricant sweeps completely across the loaded contact patch.

Verify pin hardness and dimensional fit simultaneously during overhaul: worn or undersized 35 mm pins introduce palpable basket bounce and accelerate shock loading across the entire leveling linkage.

GE35ES-2RS Cross-Reference Equivalents

Brand / Standard Nominal Equivalent ISO 12240-1 Series E Notes (35 × 55 × 25/20 mm)
ZQM / GB/T 9163 GE35ES-2RS Hardened steel/steel, phosphate & MoS₂ surface, ES grease grooves, -2RS seals
SKF GE 35 ES-2RS Steel-on-steel radial spherical plain bearing, twin elastomer lip seals
INA / Schaeffler GE35-DO-2RS Series E maintenance-type steel-on-steel (DO), double-sided lip seals
IKO GE35ES-2RS Sealed ISO Series E steel-on-steel spherical plain bearing
Fluro GE 35 ES-2RS Relubricatable steel-on-steel joint with -2RS contact seals

Safety-Critical Substitution Notice: Listed equivalents align exclusively on nominal ISO 12240-1 Series E external boundaries (35 × 55 × 25/20 mm). Aerial-platform leveling cylinders are personnel-safety assemblies; radial clearance class (C2/CN/C3), seal low-temperature flexibility, coating thickness, and sliding load capacity vary among producers and must be verified via ZQM’s formal engineering drawing before fleet release.

Sourcing GE35ES-2RS for MEWP Builders & Rental Fleet Depots

Aerial work platform (MEWP) OEMs, hydraulic leveling cylinder suppliers, and rental-equipment repair depots quoting GE35ES-2RS should provide: housing press-fit tolerance (to determine CN vs. C3 radial clearance), sub-zero or coastal climate exposure, and batch quantity. ZQM delivers formal quotation engineering drawings confirming exact sliding ratings, tolerances, and surface finish prior to production, alongside traceable dimensional and hardness inspection sheets. Reach our export engineers via our ZQM quotation form.

GE35ES-2RS Aerial Platform Bearing FAQ

Related Sizes & Engineering Links: Compare neighboring cylinder bores GE25ES-2RS (25 mm) and GE45ES-2RS (45 mm), verify nomenclature with our Bearing Suffix Decoder, inspect our Quality Inspection Standards, or browse all Spherical Plain Bearings and Conveyors & Lifting Equipment.

Why is GE35ES-2RS favored for boom-lift basket leveling cylinder clevises?

Its conforming steel-on-steel spherical contact holds static platform loads smoothly without point indentation, while the phosphated MoS₂ layer resists micro-oscillation fretting caused by wind sway and operator movement at full boom elevation.

Where must the GE35ES-2RS outer-ring split sit inside a vertical leveling cylinder eye?

Always orient the single radial fracture in the outer ring at 90° to the primary hydraulic cylinder holding axis. Placing the split in the side neutral zone ensures sustained basket gravity loads never distort the outer ring.

How do maintenance teams prevent micro-oscillation fretting in boom-lift GE35ES-2RS pivots?

At scheduled fleet service intervals, articulate the basket through full leveling tilt while purging fresh MoS₂-fortified EP grease through the ES oil groove. Cycling the joint spreads fresh lubricant across the narrow micro-oscillation load patch and expels jobsite moisture.

Does ZQM provide formal engineering drawings with verified sliding capacities for GE35ES-2RS?

Yes. Dynamic and static sliding load ratings, radial clearance class, permissible misalignment angle, and surface finish specs are formally confirmed on our factory quotation drawing before production or sample shipment.

Scroll to Top