Conforming to ISO 12240-1 Dimension Series E, the GE25ES-2RS (GE 25 ES-2RS) compact sealed radial spherical plain bearing fits a 25 mm hardened pivot pin inside a 42 mm clevis eye bore, spanning an inner-ring width (B) of 20 mm and an outer-ring width (C) of 16 mm. Outfitted with phosphated and molybdenum-disulfide (MoS₂) treated hardened steel sliding surfaces, dual -2RS elastomer lip seals, and relubrication grooves in both rings, it keeps articulated farm-loader steering cylinders and compact hydraulic bucket linkages moving smoothly through wet barnyard mud, manure slurry, and corrosive fertilizer spray.
GE25ES-2RS ISO 12240-1 Boundary Envelope Overview
| Parameter | ISO 12240-1 Series E Spec | Field Engineering Note |
|---|---|---|
| Part Designation | GE25ES-2RS | Compact sealed steel-on-steel radial spherical plain bearing |
| Pin Bore (d) | 25 mm | Nominal hardened steel clevis pin diameter |
| Housing OD (D) | 42 mm | Nominal hydraulic cylinder rod-eye bore |
| Inner Ball Width (B) | 20 mm | Full axial width of ground spherical inner ring |
| Outer Ring Width (C) | 16 mm | Single-fractured outer ring press-fit width |
| Sliding Metallurgy | Hardened steel / steel | Phosphate + MoS₂ surface layer; scheduled EP grease replenishment required |
| Contamination Barrier | -2RS double lip seals + ES oilways | Dual elastomer contact seals; annular grease grooves & holes in both rings |
| Sliding Ratings, Clearance & Tilt | Confirmed on factory drawing | Verified sliding load ratings, radial clearance class & permissible tilt supplied at quotation |
Oscillating Clevis p·v Wear Behavior & 90° Split Placement
Compact utility loaders and barn-cleaning skid machines turn full lock dozens of times every hour while scooping uneven feed bales or scraping slick concrete alleys. Unlike rotating shafts governed by rolling-element fatigue, a spherical plain steering eye operates in slow, oscillating boundary contact where surface longevity tracks the product of specific contact pressure and sliding velocity (p·v) alongside disciplined grease flushing.
To assemble the hardened inner sphere inside the solid outer shell, the outer ring features a single radial fracture plane. Farm-equipment service shops pressing a fresh GE25ES-2RS into a steering rod eye must align this radial fracture strictly at 90° perpendicular to the cylinder push-pull axis; positioning the split along the steering thrust vector risks spreading the outer ring under sudden curb impact and binding the pin.
Farm Loader Steering & Bucket Linkage Misalignment Defense
Welded compact loader arms and front-axle steering brackets accumulate slight frame twist over years of rutted pasture work. The 4 mm axial overhang created by pairing a 20 mm inner ring with a 16 mm outer ring grants generous spherical self-alignment inside tight clevis ears, sparing slender hydraulic cylinder piston rods from side-loading fatigue and blown rod wipers.
Standard open steel bushings seize rapidly once liquid nitrogen fertilizer, wet clay, and grit work into the clearance gap. Dual -2RS contact seals track the spherical inner ring continuously throughout articulation, holding grease inside while repelling pressure-washer overspray and acidic barnyard runoff.
MoS₂ Grease Purging & Seasonal Maintenance Practice
Because steel-on-steel Series E bearings rely on periodic boundary-film renewal, agricultural operators should pump NLGI 2 lithium-complex or calcium-sulfonate EP grease fortified with solid MoS₂ through the cylinder eye zerk at every scheduled loader service interval. Lubricant enters the ES outer-ring annular channel, distributes across both oil holes, and pushes moisture or fine dust gently past the elastomer lips.
Before winter storage or after heavy lime-spreading seasons, purge fresh grease into all 25 mm steering and bucket tilt joints while cycling the steering cylinder slowly to coat the entire spherical track against standby corrosion.
GE25ES-2RS Cross-Brand Nominal Reference
| Manufacturer / Standard | Equivalent Part Code | Series E Alignment (25 × 42 × 20/16 mm) |
|---|---|---|
| ZQM / GB/T 9163 | GE25ES-2RS | Hardened steel/steel, phosphate & MoS₂ finish, ES oil grooves, -2RS lip seals |
| SKF | GE 25 ES-2RS | Steel-on-steel radial spherical plain bearing with twin contact seals |
| INA / Schaeffler | GE25-DO-2RS | ISO Series E maintenance-required steel/steel (DO), double-sided lip seals |
| IKO | GE25ES-2RS | Sealed Series E steel-on-steel spherical plain bearing |
| Fluro | GE 25 ES-2RS | Relubricatable steel/steel joint bearing with -2RS elastomer seals |
Interchange Boundary Statement: Equivalence above applies solely to nominal ISO 12240-1 Series E external envelope dimensions (25 × 42 × 20/16 mm). Elastomer chemical compatibility against agricultural sprays, radial clearance group (C2/CN/C3), coating specification, and sliding load capacity differ by producer and are formally verified on ZQM’s quotation engineering drawing.
Ordering GE25ES-2RS for Compact Loader OEMs & Cylinder Dealers
Compact loader builders, hydraulic attachment makers, and farm-parts distributors quoting GE25ES-2RS should note: expected batch volume, rod-eye housing interference fit (to confirm CN vs. C3 radial clearance after press-fitting), and ambient operating temperatures. Every formal ZQM quote includes a factory confirmation drawing verifying exact sliding capacities and tolerances, with convenient mixed-size pallet consolidation across Series E bores. Send your parts list via our direct inquiry desk.
GE25ES-2RS Agricultural Linkage Q&A
Related Sizes & Catalog Resources: Compare step-up pin bores GE35ES-2RS (35 mm) and GE40ES-2RS (40 mm), decode suffix letters using our Bearing Suffix Decoder, or browse all Spherical Plain Bearings and Construction & Off-Highway Machinery.
Why is GE25ES-2RS well suited to compact farm loader articulated steering cylinders?
Its compact 25 × 42 × 20/16 mm envelope fits narrow welded steering clevises while dual -2RS lip seals keep mud, slurry, and fertilizer splash out of the phosphated steel-on-steel sliding sphere during constant low-speed steering articulation.
How must technicians orient the outer-ring fracture when pressing GE25ES-2RS into a bucket cylinder eye?
Rotate the outer ring so its single radial assembly fracture sits at exactly 90° to the hydraulic cylinder push-pull axis. Keeping the split in the unloaded side zone prevents steering shocks from opening the outer ring and pinching the ball.
What grease type maximizes p·v wear life on GE25ES-2RS loader pivots?
Use an NLGI 2 lithium-complex or water-resistant calcium-sulfonate EP grease fortified with solid MoS₂. Regular purging through the ES relubrication groove maintains a protective boundary film under slow high-pressure oscillations and expels barnyard moisture.
How do buyers verify exact sliding load ratings and clearance before ordering GE25ES-2RS in volume?
ZQM issues a confirmed factory engineering drawing with every formal quotation detailing verified dynamic/static sliding load ratings, radial clearance class, permissible tilt angle, and surface treatment, and offers sample lots for cylinder fit trials.



