NN30 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN3056 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN3056 double-row cylindrical roller bearing: 280 mm bore (d), 420 mm outside diameter (D), 106 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 280 mmD 420 mmB/C 106 mmCr 1080 kNMass 49.5 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 280D 420B 106

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d280 mm
Outside diameter D420 mm
Mass49.5 kg
Catalogue dynamic load Cr1080 kN
Catalogue static load Cor2080 kN
Mounting dimensions & additional parameters (7)
Abutment dimension Da404 mm
Minimum chamfer r124 mm
Minimum chamfer r344 mm
Maximum fillet ra3 mm
Maximum fillet rb3 mm
Catalogue speed (see source conditions) speed2000 rpm
Shared B/C dimension (catalogue column) BC106 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN3056?

The NN3056 catalogue lists Da max = 404 mm; ra max = 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN3056?

The catalogue reference mass for NN3056 is 49.5 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN3056?

In the ZQM General Catalogue, NN3056 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1080 kN, C0r 2080 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN3056 double-row cylindrical roller bearing?

NN3056 (280 × 420 × 106 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN3056

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top