NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN49/670 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN49/670 double-row cylindrical roller bearing: 670 mm bore (d), 900 mm outside diameter (D), 230 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 670 mmD 900 mmB/C 230 mmCr 4150 kNMass 419 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 670D 900B 230

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d670 mm
Outside diameter D900 mm
Mass419 kg
Catalogue dynamic load Cr4150 kN
Catalogue static load Cor11500 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da856 mm
Abutment dimension da710 mm
Minimum chamfer r126 mm
Minimum chamfer r346 mm
Maximum fillet ra5 mm
Maximum fillet rb5 mm
Catalogue speed (see source conditions) speed800 rpm
Shared B/C dimension (catalogue column) BC230 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN49/670?

The NN49/670 catalogue lists da min = 710 mm; Da max = 856 mm; ra max = 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN49/670?

The catalogue reference mass for NN49/670 is 419 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN49/670?

In the ZQM General Catalogue, NN49/670 has nominal boundary dimensions of Array. Catalog load ratings: Cr 4150 kN, C0r 11500 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN49/670 double-row cylindrical roller bearing?

NN49/670 (670 × 900 × 230 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN49/670

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top