NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING
NN49/500X1 Double-Row Cylindrical Roller Bearing Dimensions & Specifications
NN49/500X1 double-row cylindrical roller bearing: 500 mm bore (d), 700 mm outside diameter (D), 170 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 500 mm |
|---|---|
| Outside diameter D | 700 mm |
| Mass | 210 kg |
| Catalogue dynamic load Cr | 2700 kN |
| Catalogue static load Cor | 5400 kN |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da | 680 mm |
|---|---|
| Abutment dimension da | 549 mm |
| Minimum chamfer r12 | 5 mm |
| Minimum chamfer r34 | 5 mm |
| Maximum fillet ra | 4 mm |
| Maximum fillet rb | 4 mm |
| Catalogue speed (see source conditions) speed | 800 rpm |
| Shared B/C dimension (catalogue column) BC | 170 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NN49/500X1?
The NN49/500X1 catalogue lists da min = 549 mm; Da max = 680 mm; ra max = 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of NN49/500X1?
The catalogue reference mass for NN49/500X1 is 210 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
What are the main dimensions and load ratings of NN49/500X1?
In the ZQM General Catalogue, NN49/500X1 has nominal boundary dimensions of Array. Catalog load ratings: Cr 2700 kN, C0r 5400 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.
What rib and bore features define NN49/500X1 double-row cylindrical roller bearing?
NN49/500X1 (500 × 700 × 170 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
DIRECT FACTORY SOURCING
Request a Quote for NN49/500X1
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

