NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN49/530 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN49/530 double-row cylindrical roller bearing: 530 mm bore (d), 710 mm outside diameter (D), 180 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 530 mmD 710 mmB/C 180 mmCr 2860 kNMass 202 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 530D 710B 180

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d530 mm
Outside diameter D710 mm
Mass202 kg
Catalogue dynamic load Cr2860 kN
Catalogue static load Cor7800 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da676 mm
Abutment dimension da561 mm
Minimum chamfer r125 mm
Minimum chamfer r345 mm
Maximum fillet ra4 mm
Maximum fillet rb4 mm
Catalogue speed (see source conditions) speed1000 rpm
Shared B/C dimension (catalogue column) BC180 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN49/530?

The NN49/530 catalogue lists da min = 561 mm; Da max = 676 mm; ra max = 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN49/530?

The catalogue reference mass for NN49/530 is 202 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN49/530?

In the ZQM General Catalogue, NN49/530 has nominal boundary dimensions of Array. Catalog load ratings: Cr 2860 kN, C0r 7800 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN49/530 double-row cylindrical roller bearing?

NN49/530 (530 × 710 × 180 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN49/530

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top