NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN4996 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN4996 double-row cylindrical roller bearing: 480 mm bore (d), 650 mm outside diameter (D), 170 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 480 mmD 650 mmB/C 170 mmCr 2330 kNMass 164 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 480D 650B 170

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d480 mm
Outside diameter D650 mm
Mass164 kg
Catalogue dynamic load Cr2330 kN
Catalogue static load Cor6100 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da617 mm
Abutment dimension da510 mm
Minimum chamfer r125 mm
Minimum chamfer r345 mm
Maximum fillet ra4 mm
Maximum fillet rb4 mm
Catalogue speed (see source conditions) speed1200 rpm
Shared B/C dimension (catalogue column) BC170 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN4996?

The NN4996 catalogue lists da min = 510 mm; Da max = 617 mm; ra max = 4 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN4996?

The catalogue reference mass for NN4996 is 164 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN4996?

In the ZQM General Catalogue, NN4996 has nominal boundary dimensions of Array. Catalog load ratings: Cr 2330 kN, C0r 6100 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN4996 double-row cylindrical roller bearing?

NN4996 (480 × 650 × 170 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN4996

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top