NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING
NN49/630 Double-Row Cylindrical Roller Bearing Dimensions & Specifications
NN49/630 double-row cylindrical roller bearing: 630 mm bore (d), 850 mm outside diameter (D), 218 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 630 mm |
|---|---|
| Outside diameter D | 850 mm |
| Mass | 328 kg |
| Catalogue dynamic load Cr | 4020 kN |
| Catalogue static load Cor | 11400 kN |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da | 807 mm |
|---|---|
| Abutment dimension da | 670 mm |
| Minimum chamfer r12 | 6 mm |
| Minimum chamfer r34 | 6 mm |
| Maximum fillet ra | 5 mm |
| Maximum fillet rb | 5 mm |
| Catalogue speed (see source conditions) speed | 850 rpm |
| Shared B/C dimension (catalogue column) BC | 218 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NN49/630?
The NN49/630 catalogue lists da min = 670 mm; Da max = 807 mm; ra max = 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of NN49/630?
The catalogue reference mass for NN49/630 is 328 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
What are the main dimensions and load ratings of NN49/630?
In the ZQM General Catalogue, NN49/630 has nominal boundary dimensions of Array. Catalog load ratings: Cr 4020 kN, C0r 11400 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.
What rib and bore features define NN49/630 double-row cylindrical roller bearing?
NN49/630 (630 × 850 × 218 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
DIRECT FACTORY SOURCING
Request a Quote for NN49/630
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

