NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING
NN4964 Double-Row Cylindrical Roller Bearing Dimensions & Specifications
NN4964 double-row cylindrical roller bearing: 320 mm bore (d), 440 mm outside diameter (D), 118 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 320 mm |
|---|---|
| Outside diameter D | 440 mm |
| Mass | 50.2 kg |
| Catalogue dynamic load Cr | 1060 kN |
| Catalogue static load Cor | 2500 kN |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da | 418 mm |
|---|---|
| Abutment dimension da | 340 mm |
| Minimum chamfer r12 | 3 mm |
| Minimum chamfer r34 | 3 mm |
| Maximum fillet ra | 2.5 mm |
| Maximum fillet rb | 2.5 mm |
| Catalogue speed (see source conditions) speed | 1400 rpm |
| Shared B/C dimension (catalogue column) BC | 118 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NN4964?
The NN4964 catalogue lists da min = 340 mm; Da max = 418 mm; ra max = 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of NN4964?
The catalogue reference mass for NN4964 is 50.2 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
What are the main dimensions and load ratings of NN4964?
In the ZQM General Catalogue, NN4964 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1060 kN, C0r 2500 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.
What rib and bore features define NN4964 double-row cylindrical roller bearing?
NN4964 (320 × 440 × 118 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
DIRECT FACTORY SOURCING
Request a Quote for NN4964
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

