NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN4968 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN4968 double-row cylindrical roller bearing: 340 mm bore (d), 460 mm outside diameter (D), 118 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 340 mmD 460 mmB/C 118 mmCr 1100 kNMass 52.1 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 340D 460B 118

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d340 mm
Outside diameter D460 mm
Mass52.1 kg
Catalogue dynamic load Cr1100 kN
Catalogue static load Cor2650 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da438 mm
Abutment dimension da361 mm
Minimum chamfer r123 mm
Minimum chamfer r343 mm
Maximum fillet ra2.5 mm
Maximum fillet rb2.5 mm
Catalogue speed (see source conditions) speed1700 rpm
Shared B/C dimension (catalogue column) BC118 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN4968?

The NN4968 catalogue lists da min = 361 mm; Da max = 438 mm; ra max = 2.5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN4968?

The catalogue reference mass for NN4968 is 52.1 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN4968?

In the ZQM General Catalogue, NN4968 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1100 kN, C0r 2650 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN4968 double-row cylindrical roller bearing?

NN4968 (340 × 460 × 118 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN4968

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top