NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING
NN4976 Double-Row Cylindrical Roller Bearing Dimensions & Specifications
NN4976 double-row cylindrical roller bearing: 380 mm bore (d), 520 mm outside diameter (D), 140 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 380 mm |
|---|---|
| Outside diameter D | 520 mm |
| Mass | 81.3 kg |
| Catalogue dynamic load Cr | 1450 kN |
| Catalogue static load Cor | 3600 kN |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da | 493 mm |
|---|---|
| Abutment dimension da | 404 mm |
| Minimum chamfer r12 | 4 mm |
| Minimum chamfer r34 | 4 mm |
| Maximum fillet ra | 3 mm |
| Maximum fillet rb | 3 mm |
| Catalogue speed (see source conditions) speed | 1500 rpm |
| Shared B/C dimension (catalogue column) BC | 140 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for NN4976?
The NN4976 catalogue lists da min = 404 mm; Da max = 493 mm; ra max = 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of NN4976?
The catalogue reference mass for NN4976 is 81.3 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
What are the main dimensions and load ratings of NN4976?
In the ZQM General Catalogue, NN4976 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1450 kN, C0r 3600 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.
What rib and bore features define NN4976 double-row cylindrical roller bearing?
NN4976 (380 × 520 × 140 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
DIRECT FACTORY SOURCING
Request a Quote for NN4976
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

