NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN4980 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN4980 double-row cylindrical roller bearing: 400 mm bore (d), 540 mm outside diameter (D), 140 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 400 mmD 540 mmB/C 140 mmCr 1470 kNMass 84.1 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 400D 540B 140

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d400 mm
Outside diameter D540 mm
Mass84.1 kg
Catalogue dynamic load Cr1470 kN
Catalogue static load Cor3800 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da513 mm
Abutment dimension da425 mm
Minimum chamfer r124 mm
Minimum chamfer r344 mm
Maximum fillet ra3 mm
Maximum fillet rb3 mm
Catalogue speed (see source conditions) speed1500 rpm
Shared B/C dimension (catalogue column) BC140 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN4980?

The NN4980 catalogue lists da min = 425 mm; Da max = 513 mm; ra max = 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN4980?

The catalogue reference mass for NN4980 is 84.1 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN4980?

In the ZQM General Catalogue, NN4980 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1470 kN, C0r 3800 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN4980 double-row cylindrical roller bearing?

NN4980 (400 × 540 × 140 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN4980

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top