NN49 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN4984 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN4984 double-row cylindrical roller bearing: 420 mm bore (d), 560 mm outside diameter (D), 140 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 420 mmD 560 mmB/C 140 mmCr 1510 kNMass 87.9 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 420D 560B 140

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d420 mm
Outside diameter D560 mm
Mass87.9 kg
Catalogue dynamic load Cr1510 kN
Catalogue static load Cor4000 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da533 mm
Abutment dimension da445 mm
Minimum chamfer r124 mm
Minimum chamfer r344 mm
Maximum fillet ra3 mm
Maximum fillet rb3 mm
Catalogue speed (see source conditions) speed1400 rpm
Shared B/C dimension (catalogue column) BC140 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN4984?

The NN4984 catalogue lists da min = 445 mm; Da max = 533 mm; ra max = 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN4984?

The catalogue reference mass for NN4984 is 87.9 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN4984?

In the ZQM General Catalogue, NN4984 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1510 kN, C0r 4000 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN4984 double-row cylindrical roller bearing?

NN4984 (420 × 560 × 140 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN4984

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top