Designed around the space-saving ISO 10 extra-light section, the 7022ACM (7022 ACM) single-row angular contact ball bearing fits a large 110 mm rotor shaft inside a compact 170 mm housing bore and slim 28 mm width, tipping the scales at just 2.41 kg. Offering 100 kN dynamic and 101 kN static catalog ratings with a 25° contact angle (AC) and solid machined brass cage (M), it is an engineered match for oil-flooded rotary screw compressor male-rotor thrust cartridges where tight male-to-female rotor center spacing forbids bulkier 72- or 73-series housings.
7022ACM Technical Specifications & Dimensions
| Parameter Category | Technical Parameter (Symbol) | Catalogue Reference Value |
|---|---|---|
| Boundary Dimensions & Weight | Bore diameter (d) | 110 mm |
| Boundary Dimensions & Weight | Outside diameter (D) | 170 mm |
| Boundary Dimensions & Weight | Width (B) | 28 mm |
| Boundary Dimensions & Weight | Reference mass (Weight) | 2.41 kg |
| Load Ratings & Limiting Speeds | Basic dynamic load rating (Cr) | 100 kN |
| Load Ratings & Limiting Speeds | Basic static load rating (Cor) | 101 kN |
| Load Ratings & Limiting Speeds | Limiting speed (grease) | 3000 rpm |
| Load Ratings & Limiting Speeds | Limiting speed (oil) | 4000 rpm |
| Abutment & Fillet Dimensions | Shaft abutment diameter (da) | 120 mm |
| Abutment & Fillet Dimensions | Housing abutment diameter (Da) | 160 mm |
| Abutment & Fillet Dimensions | Minimum chamfer dimension (r12) | 2 mm |
| Abutment & Fillet Dimensions | Minimum flange chamfer (r34) | 1 mm |
| Abutment & Fillet Dimensions | Maximum fillet radius (ra) | 2 mm |
| Abutment & Fillet Dimensions | Load center distance (a) | 46.7 mm |
| Calculation Factors | Calculation factor (e) | 0.68 |
| Calculation Factors | Axial load factor (static) (Y0) | 0.38 |
| Calculation Factors | Axial load factor (Y) | 0.87 |
| Calculation Factors | Radial load factor (X) | 0.42 |
Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.
Compact 70-Series Section & 25° Rotor-End Kinematics
In twin-screw air and process-gas airends, the male rotor shaft demands large torsional stiffness (requiring a 110 mm journal on mid-to-large kW stages), yet the adjacent female rotor leaves very little radial wall thickness between parallel bearing bores. With a radial cross-section of only 30 mm ((170 − 110)/2), the 7022ACM maximizes shaft diameter without thinning the cast-iron discharge end-plate bridge.
- High-Speed Oil-Injected Stability: Rated up to 4,000 r/min in oil (3,000 r/min in grease), the 25° contact geometry (load center a = 46.7 mm) minimizes ball-spinning drag inside continuous oil-flooded compression chambers.
- Balanced Combined Load Constants: Catalog values e = 0.68, X = 0.42, Y = 0.87, and Y0 = 0.38 accommodate the simultaneous radial gas-pressure separation load and steady discharge-to-suction axial thrust acting on helical lobes.
- Machined Brass Retainer (M): Resists synthetic polyalphaolefin (PAO), polyglycol (PAG), and diester compressor lubricants at continuous discharge-end sump temperatures without the chemical hydrolysis risk associated with certain molded polymers.
Rotary Screw Compressor Airend Mounting & Axial Shimming
Oil-flooded screw airends push the male rotor strongly toward the suction end during full-load compression, while unloading or blowdown transients can briefly reverse axial force. Because one 7022ACM handles unidirectional axial thrust only, compressor builders deploy either a back-to-back (DB) pair or a triplex tandem-opposed (TBT) set on the discharge end—often behind a cylindrical roller bearing that absorbs primary radial gas force—to lock rotor end-face clearance within tight micron tolerances.
Precision machining of the airend discharge housing must respect da ≥ 120 mm, Da ≤ 160 mm, and maximum corner fillet ra ≤ 2 mm against the bearing’s r1,2 min = 2 mm and r3,4 min = 1 mm chamfers. Clean oil-port routing directly onto the 7022ACM ball track is vital to flush compression heat and hold consistent discharge-end rotor gap from cold start through full pressure. Explore our rotating-machinery portfolio on the industrial equipment overview.
7022ACM Cross-Reference & Airend Overhaul Check
| Producer / Code System | Nominal Envelope Match | Angle & Cage Verification (110 × 170 × 28 mm) |
|---|---|---|
| ZQM / GB/T 292 | 7022ACM | 25° contact angle (AC), solid machined brass cage (M) |
| SKF | 7022 CD / 7022 ACD (precision) / 7022 BGM (40°) | Check angle carefully: ACD = 25°, CD = 15°, B = 40°; confirm cage & precision grade |
| FAG / Schaeffler | B7022-E (25°) / 7022-B-MP (40°) | E = 25° (typically precision class), B = 40° industrial with brass MP cage |
| NSK | 7022A5 (25°) / 7022AM (30°) | A5 designates 25° angle; standard AM is 30° with machined brass cage |
| NTN | 7022L1 (30°) / 7022BL1 (40°) | Verify contact angle and matched set flush-grinding before airend rebuilds |
Airend Overhaul Disclaimer: Nominal ISO 15 boundary dimensions (110 × 170 × 28 mm) align across these listings, but rotary screw airends are extremely sensitive to rotor end-clearance shift. Never substitute a 40° (B) or 15° (C) bearing for a 25° (AC) unit without recalculating rotor axial float, load-center span, and thermal preload.
Sourcing 7022ACM for Compressor Airend Rebuilds & OEM Lines
When quoting 7022ACM bearings for screw-compressor service or new airend builds, tell us your pairing arrangement (DB, DF, or TBT triplex), required precision class (P0, P6, or P5), target paired axial clearance/preload, and lubricant base chemistry. ZQM ships matched compressor bearing sets worldwide for overhaul workshops and OEM airend assembly plants. Submit your compressor model or bearing list at our ZQM technical quotation page.
7022ACM Compressor Bearing FAQ
Related Selection & Comparison: For 120 mm compact compressor rotors, compare the 7024ACM angular contact bearing, or verify DB/DF life ratings using our ISO 281 Life Calculator and Angular Contact catalog.
Why do screw compressor airends specify the 7022ACM (170 mm OD) rather than 7222 (200 mm OD)?
Twin-screw male and female rotors mesh at a fixed, tight center distance. The extra-light 7022ACM fits a rigid 110 mm shaft into a 170 mm OD bore—saving 30 mm of radial space compared with 7222—so parallel rotor bores maintain safe housing bridge thickness.
Can a single 7022ACM locate a rotary screw male rotor?
No. A single-row angular contact bearing carries axial thrust in one direction only. Screw compressor rotors experience heavy gas thrust toward suction under load and reverse blowdown forces during unloading, requiring matched DB pairs or TBT triplex sets to hold rotor face clearance accurately.
Does the machined brass cage (M) withstand synthetic PAG and PAO compressor oils?
Yes. Solid machined brass cages avoid the swelling, embrittlement, and hydrolytic degradation that can attack polyamide cages exposed to hot synthetic PAG/ester compressor oils and trace moisture condensate.
What inspection and pairing options can ZQM confirm before shipping 7022ACM sets?
Upon quotation, ZQM confirms matching configuration (single, DB/DF pair, or TBT set), accuracy grade, axial clearance range, and standard factory dimensional/runout inspection sheets—supporting both single-airend repair kits and scheduled OEM shipments.



