7322BM Angular Contact Ball Bearing 110 × 240 × 50 mm

7322BM heavy 73-series 40° angular contact ball bearing (110 × 240 × 50 mm, 11.5 kg, Cr 164 kN / C0r 212 kN) with machined brass cage built to absorb abrasive slurry surges and hydraulic hammer in mining slurry pumps and cutter-suction dredge pump thrust frames.

Request a Quote

Weighing a substantial 11.5 kg within its 110 × 240 × 50 mm heavy ISO 03 frame, the 7322BM (7322 BM) single-row angular contact ball bearing delivers 164 kN dynamic capacity and a formidable 212 kN static load rating. Its 40° contact angle (B) and solid machined brass cage (M) are purpose-matched to the brutal axial shock environment of mining slurry pumps, tailings transfer stations, and dredge pump bearing assemblies where dense mineral solids and plugged discharge lines trigger violent impeller thrust spikes.

7322BM Technical Specifications & Dimensions

Data Source: ZQM Factory PDF Catalogue DB (v1)Status: Catalogue Reference ValuesCatalogue Ref: 7322BM
Parameter CategoryTechnical Parameter (Symbol)Catalogue Reference Value
Boundary Dimensions & WeightBore diameter (d)110 mm
Boundary Dimensions & WeightOutside diameter (D)240 mm
Boundary Dimensions & WeightWidth (B)50 mm
Boundary Dimensions & WeightReference mass (Weight)11.5 kg
Load Ratings & Limiting SpeedsBasic dynamic load rating (Cr)164 kN
Load Ratings & Limiting SpeedsBasic static load rating (Cor)212 kN
Load Ratings & Limiting SpeedsLimiting speed (grease)2200 rpm
Load Ratings & Limiting SpeedsLimiting speed (oil)3200 rpm
Abutment & Fillet DimensionsShaft abutment diameter (da)124 mm
Abutment & Fillet DimensionsHousing abutment diameter (Da)226 mm
Abutment & Fillet DimensionsMinimum chamfer dimension (r12)3 mm
Abutment & Fillet DimensionsMinimum flange chamfer (r34)1.1 mm
Abutment & Fillet DimensionsMaximum fillet radius (ra)2.5 mm
Abutment & Fillet DimensionsLoad center distance (a)98.4 mm
Calculation FactorsCalculation factor (e)1.14
Calculation FactorsAxial load factor (static) (Y0)0.26
Calculation FactorsAxial load factor (Y)0.57
Calculation FactorsRadial load factor (X)0.35

Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.

7322BM Heavy-Section Armor Against Slurry Thrust Surges

Compared with the medium-series 7222BM (200 × 38 mm, 5.18 kg), the 7322BM more than doubles bearing mass to 11.5 kg on the identical 110 mm pump shaft. That heavier 240 mm OD and 50 mm width accommodate much larger rolling elements, driving static capacity to 212 kN so sudden choke-flow pressure waves and oversize rock impacts passing through the wet end do not dent raceways.

  • 98.4 mm Load-Center Projection: The 40° contact line places the effective load center at a = 98.4 mm, giving paired back-to-back (DB) cartridges tremendous stiffness to hold impeller-to-throatbush axial clearance tight as rubber or high-chrome liners wear.
  • Solid Machined Brass Cage (M): Resists severe vibration acceleration and shock loading common on mineral concentrator pump frames where impeller imbalance grows progressively from uneven abrasive erosion.
  • Catalog Ratings & Speeds: Limiting speeds are 2,200 r/min (grease) and 3,200 r/min (oil)—comfortably above typical 600–1,500 r/min heavy slurry pump operating ranges—with factors e = 1.14, X = 0.35, Y = 0.57, and Y0 = 0.26.

Slurry & Dredge Pump Cartridge Pairing (DB vs. Tandem DT)

Heavy mineral-processing slurry pumps and dredge booster units run massive cantilevered impellers pumping 30–65% solids by weight. Because a single 7322BM takes axial thrust in one direction only, pump bearing frames deploy matched sets according to discharge head:

Standard single-stage slurry frames install two 7322BM rings in a back-to-back (DB) locating pair at the drive end to restrain both forward suction thrust and reverse startup kick while resisting shaft bending. High-head multi-stage tailings or dredge pumps facing extreme one-way hydraulic thrust frequently step up to a tandem (DT) pair backed by an opposing third ring (TBT arrangement) to share primary discharge force evenly across two ball rows. Machine shaft shoulders to da ≥ 124 mm, housing shoulders to Da ≤ 226 mm, and corner fillets to ra ≤ 2.5 mm to clear the r1,2 min = 3 mm and r3,4 min = 1.1 mm chamfers. Review our full mining-sector support at mining & heavy industry bearing solutions.

7322BM Cross-Reference Table for Mine-Site MRO

Brand Equivalent Designation Key Attributes (110 × 240 × 50 mm)
ZQM 7322BM 40° contact angle (B), solid machined brass cage (M)
SKF 7322 BECBM / 7322 BM 40° contact angle; BECBM = Explorer internal design, universal matchable, brass cage
FAG / Schaeffler 7322-B-XL-MP / 7322-B-MP 40° contact angle (B), solid machined window brass cage (MP)
NSK 7322BM / 7322BMG 40° contact angle (B), machined brass cage (M); G = universal flush-ground
NTN 7322BL1 / 7322BL1G 40° contact angle (B), machined brass cage (L1)

Mine-Site Replacement Caution: Cross-referenced numbers guarantee matching ISO 15 nominal boundary dimensions (110 × 240 × 50 mm) only. Slurry pump bearing cartridges depend on matched end-face grinding to maintain proper axial clearance after locknut tightening; always verify matching suffixes and clearance group before swapping brands in a field rebuild.

Procurement Notes for Concentrator Plants & Pump Rebuilders

When requisitioning 7322BM bearings for slurry or dredge pump cartridge rebuilds, specify your required set configuration (DB pair, DF pair, or TBT triplex), lubrication type (EP grease purge vs. oil-bath splash), and whether your maintenance team keeps pre-matched serialized sets on the shelf for rapid frame swap-outs. ZQM supports mine-site MRO inventory replenishment, export mixed-container orders, and slurry-pump OEM programs. Request pricing and lead time through our industrial quote request desk.

7322BM Slurry & Dredge Pump FAQ

Related Selection & Comparison: Stepping up to 120 mm heavy slurry or marine shafts? Compare the 262 kN 7324BM angular contact bearing, review severe slurry wear guidance in Mining & Crushing, or browse Angular Contact Ball Bearings.

Why do heavy mining slurry pumps use 7322BM instead of a standard radial roller bearing alone?

Radial cylindrical roller bearings handle radial impeller weight well but cannot lock high bidirectional hydraulic thrust. Pairing matched 7322BM bearings (C0r = 212 kN, 40° contact angle) at the thrust end absorbs intense slurry surge thrust while holding impeller axial clearance steady.

When is a tandem DT (or TBT triplex) 7322BM setup chosen over a standard DB pair?

In high-head tailings booster pumps or long-pipeline dredge pumps where sustained unidirectional hydraulic thrust approaches a single bearing’s life limit, two 7322BM bearings mounted in tandem (DT) share the main thrust load while an opposing third bearing handles reverse unloading forces.

How does the 11.5 kg 7322BM handle worn-impeller vibration on remote mine sites?

Abrasive slurry wears impeller vanes unevenly, inducing growing centrifugal imbalance. The heavy 50 mm ring section, 212 kN static rating, and solid machined brass cage (M) resist cage fracture and raceway brinelling far better than lighter-section or sheet-cage alternatives.

Can ZQM pack 7322BM bearings as matched pairs for rapid pump cartridge changeouts?

Yes. Let us know your exact DB, DF, or TBT set requirement, desired axial clearance group, and target quantity. ZQM supplies both single-cartridge trial orders and recurring mine-site MRO warehouse stock with factory dimensional and hardness inspection documentation.

Scroll to Top