The 7220BM (also designated 7220 BM) single-row angular contact ball bearing measures 100 × 180 × 34 mm with a catalog weight of 4.00 kg, delivering a basic dynamic rating of 100 kN and static capacity of 114 kN. Built with a steep 40° contact angle (B) and a solid machined brass cage (M), it is widely deployed in back-to-back (DB) thrust cartridges on high-head petrochemical centrifugal process pumps where hydraulic impeller balance shifts sharply during suction transients. ZQM manufactures and supplies 7220BM assemblies for refinery maintenance turnarounds and API-class rotating equipment builders worldwide.
7220BM Technical Specifications & Dimensions
| Parameter Category | Technical Parameter (Symbol) | Catalogue Reference Value |
|---|---|---|
| Boundary Dimensions & Weight | Bore diameter (d) | 100 mm |
| Boundary Dimensions & Weight | Outside diameter (D) | 180 mm |
| Boundary Dimensions & Weight | Width (B) | 34 mm |
| Boundary Dimensions & Weight | Reference mass (Weight) | 4.00 kg |
| Load Ratings & Limiting Speeds | Basic dynamic load rating (Cr) | 100 kN |
| Load Ratings & Limiting Speeds | Basic static load rating (Cor) | 114 kN |
| Load Ratings & Limiting Speeds | Limiting speed (grease) | 3000 rpm |
| Load Ratings & Limiting Speeds | Limiting speed (oil) | 4000 rpm |
| Abutment & Fillet Dimensions | Shaft abutment diameter (da) | 112 mm |
| Abutment & Fillet Dimensions | Housing abutment diameter (Da) | 168 mm |
| Abutment & Fillet Dimensions | Minimum chamfer dimension (r12) | 2.1 mm |
| Abutment & Fillet Dimensions | Minimum flange chamfer (r34) | 1.1 mm |
| Abutment & Fillet Dimensions | Maximum fillet radius (ra) | 2 mm |
| Abutment & Fillet Dimensions | Load center distance (a) | 75.7 mm |
| Calculation Factors | Calculation factor (e) | 1.14 |
| Calculation Factors | Axial load factor (static) (Y0) | 0.26 |
| Calculation Factors | Axial load factor (Y) | 0.57 |
| Calculation Factors | Radial load factor (X) | 0.35 |
Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.
7220BM 40° Contact Geometry & Brass Cage Construction
Within the ISO 15 medium-section 02 dimension series, the 7220BM pairs a 100 mm cylindrical bore with a 180 mm outer diameter and 34 mm ring width. Because the B suffix defines a 40° nominal contact angle, the effective load center sits at a = 75.7 mm from the narrow face—substantially wider than shallower 25° variants—giving a back-to-back mounted pair strong resistance to shaft overturning moments caused by volute radial unbalance.
- Unidirectional Axial Carrying Rule: A single 7220BM supports axial thrust in only one direction; under pure radial load it generates an induced internal axial force, so process pump thrust housings almost universally pair two bearings in an opposed DB (back-to-back) layout to lock rotor endplay in both directions.
- Solid Machined Brass Cage (M): Machined from brass bar stock rather than pressed steel or polyamide, the M cage avoids polymer softening in hot hydrocarbon oil-bath sumps and stays structurally stable during sudden impeller cavitation bursts.
- Catalog Kinematic Factors: With limiting speeds of 3,000 r/min (grease) and 4,000 r/min (oil), its ISO 281 calculation constants are e = 1.14, X = 0.35, Y = 0.57, and static factor Y0 = 0.26.
Petrochemical Process Pump Thrust Cartridge Fitment
High-head refinery charge pumps, boiler-feed boosters, and light-hydrocarbon transfer units subject the outboard locating bearing to abrupt thrust reversals during start-up, minimum-flow recirculation, and wear-ring degradation. Mounting two 7220BM bearings back-to-back spreads their effective load lines across the 75.7 mm load-center projection, stiffening the shaft overhang between the mechanical seal and coupling hub.
Housing and shaft machining should adhere strictly to catalog abutment limits: shaft shoulder diameter da ≥ 112 mm, housing shoulder Da ≤ 168 mm, and maximum fillet radius ra ≤ 2 mm to clear the r1,2 min = 2.1 mm and r3,4 min = 1.1 mm ring chamfers. For continuous 2-pole or 4-pole electric-motor-driven pumps running in ring-oiled or oil-mist sumps, technicians should confirm the matched-pair axial clearance or light preload group prior to locknut torqueing so thermal expansion across the housing does not induce parasitic skidding. Explore related rotating-equipment solutions on our industrial sectors page.
7220BM Cross-Brand Reference & Suffix Verification
| Manufacturer | Reference Designation | Structural Notes (100 × 180 × 34 mm) |
|---|---|---|
| ZQM | 7220BM | 40° contact angle (B), solid machined brass cage (M) |
| SKF | 7220 BECBM / 7220 BM | 40° contact angle; BECBM denotes Explorer internal design, universal matchable & brass cage |
| FAG / Schaeffler | 7220-B-XL-MP / 7220-B-MP | 40° contact angle (B), solid window-type machined brass cage (MP) |
| NSK | 7220BM / 7220BMG | 40° contact angle (B), machined brass cage (M); G = universal flush-ground |
| NTN | 7220BL1 / 7220BL1G | 40° contact angle (B), machined brass cage (L1) |
Interchangeability Notice: The matrix above maps nominal ISO 15 boundary envelopes only. Flush-ground universal matching offsets, internal axial clearance groups (CA/CB/CC or GA/GB/GC), and raceway osculation vary among producers; never substitute single unground bearings directly into a preloaded pump pair without engineering verification.
Sourcing Matched 7220BM Sets for Refinery Turnarounds
Before placing a purchase order for pump overhauls, confirm three operational points with your reliability engineer: whether your cartridge requires individually matched DB sets (universal flush-ground or factory-paired with serial matching marks), the target axial clearance or preload class suited to your sump viscosity, and any required dimensional inspection or hardness test sheets for plant QA records. ZQM supports single-pair emergency spares, multi-SKU turnaround kits, and scheduled OEM volume deliveries from our Wafangdian manufacturing base and coastal export logistics team. Send your pump tag number or print directly via our engineering quotation desk.
7220BM Technical Q&A
Related Selection & Comparison: Need higher speed stability instead of 40° peak thrust in the exact same 100 × 180 × 34 mm envelope? Compare the 25° 7220ACM angular contact bearing, or browse all Angular Contact Ball Bearings and our Suffix Decoder.
Can a single 7220BM bearing hold bidirectional thrust on a centrifugal pump shaft?
No. Because the 7220BM is a single-row 40° angular contact bearing, it supports axial load in one direction only. Centrifugal pumps experiencing forward discharge thrust and reverse start-up surge must install two matched 7220BM units back-to-back (DB) or face-to-face (DF) to restrain shaft movement in both directions.
Why choose 7220BM (40°) instead of 7220ACM (25°) for high-head refinery pumps?
At the same 100 × 180 × 34 mm envelope, 7220BM uses a 40° contact angle with load center a = 75.7 mm (versus 49.6 mm on the 25° 7220ACM). That steeper angle resists sustained hydraulic axial thrust and builds a wider effective moment span when paired DB, which protects mechanical seals from excessive shaft deflection.
Why is the machined brass cage (M) preferred over polyamide in hydrocarbon oil sumps?
Process pump sumps frequently encounter elevated sump temperatures, aggressive EP/anti-wear oil additives, and brief dry-start moments. A solid machined brass cage maintains pocket geometry and dimensional strength under chemical and thermal conditions that can degrade molded polyamide retainers.
What must buyers specify when ordering 7220BM pairs from ZQM?
Indicate whether bearings will be mounted in DB, DF, or tandem DT sets, state your preferred axial clearance or preload class, and note lubrication method (oil bath, oil mist, or grease) plus quantity. ZQM can supply trial pairs for turnaround verification as well as recurring OEM batches with standard factory dimensional inspection reports.



