7222BM Angular Contact Ball Bearing 110 × 200 × 38 mm

7222BM 40° single-row angular contact ball bearing (110 × 200 × 38 mm, 5.18 kg, Cr 147 kN / C0r 135 kN) with machined brass cage built for vertical chemical reactor and mixing agitator output shafts. Handles sustained dead-weight suspension, downward fluid thrust, and cantilevered impeller bending.

Request a Quote

Sized at 110 × 200 × 38 mm with a net weight of 5.18 kg, the 7222BM (7222 BM) single-row angular contact ball bearing combines a 147 kN basic dynamic load rating with 135 kN static capacity inside a 40° contact angle (B) and solid machined brass cage (M) architecture. It is extensively specified inside lantern pedestals and top-entry drive heads of vertical chemical reactors and mixing agitators, suspending long impeller shafts against steady downward gravity load, viscous fluid thrust, and radial baffle-induced wobble.

7222BM Technical Specifications & Dimensions

Data Source: ZQM Factory PDF Catalogue DB (v1)Status: Catalogue Reference ValuesCatalogue Ref: 7222BM
Parameter CategoryTechnical Parameter (Symbol)Catalogue Reference Value
Boundary Dimensions & WeightBore diameter (d)110 mm
Boundary Dimensions & WeightOutside diameter (D)200 mm
Boundary Dimensions & WeightWidth (B)38 mm
Boundary Dimensions & WeightReference mass (Weight)5.18 kg
Load Ratings & Limiting SpeedsBasic dynamic load rating (Cr)147 kN
Load Ratings & Limiting SpeedsBasic static load rating (Cor)135 kN
Load Ratings & Limiting SpeedsLimiting speed (grease)2600 rpm
Load Ratings & Limiting SpeedsLimiting speed (oil)3600 rpm
Abutment & Fillet DimensionsShaft abutment diameter (da)122 mm
Abutment & Fillet DimensionsHousing abutment diameter (Da)188 mm
Abutment & Fillet DimensionsMinimum chamfer dimension (r12)2.1 mm
Abutment & Fillet DimensionsMinimum flange chamfer (r34)1.1 mm
Abutment & Fillet DimensionsMaximum fillet radius (ra)2 mm
Abutment & Fillet DimensionsLoad center distance (a)84.0 mm
Calculation FactorsCalculation factor (e)1.14
Calculation FactorsAxial load factor (static) (Y0)0.26
Calculation FactorsAxial load factor (Y)0.57
Calculation FactorsRadial load factor (X)0.35

Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.

7222BM Vertical-Axis Structural Mechanics & Rating Profile

Unlike horizontal shafts where gravity acts radially, a vertical agitator shaft places continuous unidirectional downward axial force on the upper thrust cartridge every minute the vessel operates—even at zero speed. The 7222BM’s 40° contact geometry channels that axial weight cleanly into the pedestal shoulder while offering a long 84.0 mm load-center projection for overturning resistance when paired back-to-back.

  • High Dynamic Reserve (Cr 147 kN / C0r 135 kN): Long continuous batch campaigns in polymerization, fermentation, and slurry leaching tanks demand high fatigue life under combined downward thrust and erratic radial vortex buffeting.
  • Vertical-Axis Brass Cage Stability (M): On vertical shafts, cage weight rests axially on the guiding land or rolling elements. A rigid machined brass retainer maintains concentric guidance under gravity and resists chemical vapor ingress better than stamped or polymeric retainers.
  • Catalog Kinematic Envelope: Limiting speeds reach 2,600 r/min (grease) and 3,600 r/min (oil), with ISO calculation factors e = 1.14, X = 0.35, Y = 0.57, and Y0 = 0.26.

Top-Entry Reactor Drive Pedestal & Lubrication Practices

Top-entry chemical agitators typically feature long cantilevered shafts extending several meters below the mechanical seal with no submerged steady bearing. Mounting two 7222BM bearings back-to-back (DB) in the upper lantern housing spreads their effective support span across the 84.0 mm load center to control shaft whip at the seal faces; where downward impeller pumping thrust is especially heavy and upward reversal is negligible, engineers occasionally configure a tandem (DT) stack opposing a single upper locating unit.

Pedestal sleeves and housing bores must conform to catalog shoulders: shaft abutment da ≥ 122 mm, housing shoulder Da ≤ 188 mm, and fillet radius ra ≤ 2 mm clearing r1,2 min = 2.1 mm and r3,4 min = 1.1 mm chamfers. On vertical grease-lubricated pedestals, gravity causes oil bleed to migrate downward—installing an engineered grease-retention baffle below the lower bearing and specifying a high-mechanical-stability thickener prevents upper-bearing starvation during 8,000-hour chemical campaigns. Browse process-plant equipment support on our industrial sectors portal.

7222BM Cross-Brand Reference Matrix

Manufacturer Reference Number Design Summary (110 × 200 × 38 mm)
ZQM 7222BM 40° contact angle (B), solid machined brass cage (M)
SKF 7222 BECBM / 7222 BM 40° contact angle; BECBM = Explorer internal geometry, universal matchable, brass cage
FAG / Schaeffler 7222-B-XL-MP / 7222-B-MP 40° contact angle (B), solid window-type machined brass cage (MP)
NSK 7222BM / 7222BMG 40° contact angle (B), machined brass cage (M); G = universal flush-ground
NTN 7222BL1 / 7222BL1G 40° contact angle (B), machined brass cage (L1)

Interchange Compliance Note: Listed references correspond strictly to nominal ISO 15 boundary dimensions (110 × 200 × 38 mm). Vertical agitator pedestals often rely on specific paired axial clearances or preload to eliminate seal-face axial bounce; always verify matched-set tolerances and lubrication path geometry against the agitator OEM drawing before replacement.

Pre-Order Verification for Chemical Plant & Agitator OEM Buyers

To prepare an accurate factory quotation for 7222BM reactor drive bearings, share your mounting configuration (DB pair, DF pair, or DT tandem), shaft speed and downward thrust direction, preferred lubrication arrangement (vertical grease labyrinth, oil bath, or oil mist), and required quantity. ZQM delivers trial maintenance pairs and OEM production runs with consistent dimensional traceability from our Wafangdian factory. Connect with our technical desk via our contact & RFQ page.

7222BM Technical FAQ

Related Selection & Comparison: Compare compact 25° 110 mm options via 7022ACM or heavy 73-series 110 mm thrust capacity via 7322BM, and inspect our ISO 9001 Quality Control Lab for matched DB/DF face-grinding inspection.

How should 7222BM bearings be oriented on a vertical mixing agitator shaft?

Because a single 7222BM supports axial load in only one direction, vertical agitator drive heads typically mount a matched back-to-back (DB) pair to handle continuous downward shaft weight plus upward fluid-lift reversals while stiffening the cantilevered shaft through its 84.0 mm load-center span.

What lubrication precautions apply when running 7222BM on a vertical axis?

Gravity drains lubricant downward out of the upper bearing raceway. Grease-lubricated vertical pedestals should incorporate a lower retention shield or labyrinth dam and disciplined relubrication intervals, while oil-bath designs must verify sump level or oil-mist delivery reaches the upper ball complement.

Why is 7222BM specified with a machined brass cage (M) in chemical reactor service?

Process heat conducted up the agitator shaft and occasional exposure to chemical vapors or aggressive synthetic greases can degrade polyamide retainers. A solid machined brass cage preserves pocket accuracy and vertical-axis guiding stability over prolonged campaign intervals.

Can ZQM supply matched 7222BM sets with factory dimensional inspection sheets for plant QA?

Yes. Specify DB, DF, or DT matching along with your axial clearance or preload requirement at quotation time; ZQM supports single-vessel turnaround spares as well as recurring agitator OEM deliveries accompanied by standard factory dimensional and hardness inspection documentation.

Scroll to Top