239 SERIES · SPHERICAL ROLLER BEARING

23992CAF3/W33 Spherical Roller Bearing Dimensions & Specifications

23992CAF3/W33 spherical roller bearing: 460 mm bore (d), 620 mm outside diameter (D), 118 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 460 mmD 620 mmB 118 mmCr 2220 kNMass 100 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 460D 620B 118

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d460 mm
Outside diameter D620 mm
Width B118 mm
Mass100 kg
Catalogue dynamic load Cr2220 kN
Catalogue static load Cor4950 kN
Grease-lubricated speed430 rpm
Oil-lubricated speed530 rpm
Mounting dimensions & additional parameters (8)
Abutment dimension Da602 mm
Abutment dimension da478 mm
Minimum chamfer r124 mm
Factor Y03.9
Factor Y14
Factor Y25.9
Factor e0.17
Maximum fillet ra3 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 23992CAF3/W33?

The 23992CAF3/W33 catalogue lists da min = 478 mm; Da max = 602 mm; ra max = 3 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What speed values are available for 23992CAF3/W33?

The listed values for 23992CAF3/W33 are grease: 430 rpm; oil: 530 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.

What is the reference mass of 23992CAF3/W33?

The catalogue reference mass for 23992CAF3/W33 is 100 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

Other Bearing Series with 460 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
24892CAF3/W33Spherical Roller Bearing460 × 580 × 118 mm
24992X2CAF3/W33Spherical Roller Bearing460 × 620 × 140 mm
23092CAF3/W33Spherical Roller Bearing460 × 680 × 163 mm
24092CAF3/W33Spherical Roller Bearing460 × 680 × 218 mm
23092CAD/W33X3Spherical Roller Bearing460 × 700 × 245 mm
23192CAF3/W33Spherical Roller Bearing460 × 760 × 240 mm

Compare alternative series sharing the same 460 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 23992CAF3/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top