619 SERIES · DEEP GROOVE BALL BEARING

619/1120F1 Deep Groove Ball Bearing Dimensions & Specifications

619/1120F1 deep groove ball bearing: 1120 mm bore (d), 1460 mm outside diameter (D), 150 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 1120 mmD 1460 mmB 150 mmCr 1040 kNMass 650 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Deep Groove Ball Bearingd 1120D 1460B 150

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d1120 mm
Outside diameter D1460 mm
Width B150 mm
Mass650 kg
Catalogue dynamic load Cr1040 kN
Catalogue static load Cor3100 kN
Mounting dimensions & additional parameters (5)
Abutment dimension Da1427 mm
Abutment dimension da1153 mm
Minimum chamfer r127.5 mm
Factor f017
Maximum fillet ra6 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 619/1120F1?

The 619/1120F1 catalogue lists da min = 1153 mm; Da max = 1427 mm; ra max = 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of 619/1120F1?

The catalogue reference mass for 619/1120F1 is 650 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of 619/1120F1?

In the ZQM General Catalogue, 619/1120F1 has nominal boundary dimensions of Array. Catalog load ratings: Cr 1040 kN, C0r 3100 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

Other Bearing Series with 1120 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
60/1120F1Deep Groove Ball Bearing1120 × 1580 × 200 mm
238/1120CAF3/W33Spherical Roller Bearing1120 × 1360 × 180 mm
248/1120CAF3/W33Spherical Roller Bearing1120 × 1360 × 243 mm
NJ18/1120Cylindrical Roller Bearing1120 × 1360 × 106 mm

Compare alternative series sharing the same 1120 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 619/1120F1

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top