ZQM BEARINGS · PRODUCT SERIES
619 Series Deep Groove Ball Bearings
This page lists boundary dimensions and catalogue technical data for 619 series (also referenced as 6900 series in some manufacturer designations) thin-section deep groove ball bearings. Offering greater cross-section and load capacity than the ultra-thin 618 series, the 619 series fits compact precision housings and industrial drives.

619 Series Dimensions & Technical Specifications
Select a complete model designation to view all available catalogue specifications. Dimensions in mm; load ratings in kN; mass in kg.
619 Series Structural Cross-Section Reference
| Model | d / mm | D / mm | B / mm | Cr / kN | Cor / kN | kg |
|---|---|---|---|---|---|---|
| 61920M | 100 | 140 | 20 | 42 | 41 | 0.96 |
| 61922 | 110 | 150 | 20 | 43 | 45 | 0.90 |
| 61924M | 120 | 165 | 22 | 53 | 54 | 1.54 |
| 61926M | 130 | 180 | 24 | 65 | 67 | 1.92 |
| 61928MA | 140 | 190 | 24 | 66 | 72 | 1.7 |
| 61930 | 150 | 210 | 28 | 85 | 91 | 3.05 |
| 61932MA | 160 | 220 | 28 | 87 | 96 | 3.25 |
| 61934MA | 170 | 230 | 28 | 89 | 100 | — |
| 61936MA | 180 | 250 | 33 | 119 | 128 | 5.27 |
| 61938MA | 190 | 260 | 33 | 113 | 127 | 5.25 |
| 61938X1M | 190 | 269.5 | 33 | 127 | 138 | 6.87 |
| 61940MA | 200 | 280 | 38 | 143 | 158 | 7.40 |
| 61940X1M-1 | 200 | 279.5 | 38 | 143 | 158 | 7.25 |
| 61940X1M-2 | 200 | 289.5 | 38 | 163 | 180 | 8.70 |
| 61944MA | 220 | 300 | 38 | 146 | 169 | 7.96 |
| 61944X1M | 220 | 309.5 | 38 | 151 | 180 | 9.3 |
| 61946X3M | 230 | 329.5 | 40 | 190 | 228 | 11.6 |
| 61948MA | 240 | 320 | 38 | 154 | 190 | 8.57 |
| 61952M | 260 | 360 | 46 | 204 | 255 | 14.5 |
| 61952X1M-1 | 260 | 370 | 46 | 212 | 270 | 16.6 |
| 61952X1M-2 | 260 | 369.5 | 46 | 212 | 270 | 16.5 |
| 61956MA | 280 | 380 | 46 | 209 | 272 | 15.6 |
| 61956X1M-1 | 280 | 390 | 46 | 216 | 285 | 17.6 |
| 61956X1M-2 | 280 | 389.5 | 46 | 216 | 285 | 17.6 |
| 61960 | 300 | 420 | 56 | 270 | 375 | 24.5 |
| 61960X1 | 300 | 419.5 | 56 | 270 | 375 | 20.6 |
| 61964 | 320 | 440 | 56 | 266 | 375 | 25.7 |
| 61968 | 340 | 460 | 56 | 280 | 425 | 27.1 |
| 61972 | 360 | 480 | 56 | 280 | 425 | 29.3 |
| 61976 | 380 | 520 | 65 | 325 | 510 | 40.0 |
| 61980 | 400 | 540 | 65 | 335 | 540 | 42.0 |
| 61984 | 420 | 560 | 65 | 340 | 570 | 43.0 |
| 61988 | 440 | 600 | 74 | 395 | 680 | 60.2 |
| 61992 | 460 | 620 | 74 | 405 | 720 | 68.3 |
| 61996 | 480 | 650 | 78 | 450 | 815 | 80.0 |
| 619/500F1 | 500 | 670 | 78 | 460 | 865 | 77.0 |
| 619/530F1 | 530 | 710 | 82 | 455 | 870 | 89.8 |
| 619/560F1 | 560 | 750 | 85 | 525 | 1040 | 105 |
| 619/600F1 | 600 | 800 | 90 | 550 | 1160 | 120 |
| 619/630F1 | 630 | 850 | 100 | 625 | 1350 | 163 |
| 619/670F1 | 670 | 900 | 103 | 675 | 1460 | 181 |
| 619/710F1 | 710 | 950 | 106 | 715 | 1640 | 208 |
| 619/750F1 | 750 | 1000 | 112 | 785 | 1840 | 245 |
| 619/800F1 | 800 | 1060 | 115 | 825 | 2050 | 275 |
| 619/850F1 | 850 | 1120 | 118 | 832 | 2160 | 310 |
| 619/900F1 | 900 | 1180 | 122 | 852 | 2280 | 350 |
| 619/950F1 | 950 | 1250 | 132 | 1010 | 2800 | 390 |
| 619/1000F1 | 1000 | 1320 | 140 | 1010 | 2800 | 515 |
| 619/1060F1 | 1060 | 1400 | 150 | 1010 | 3000 | 620 |
| 619/1120F1 | 1120 | 1460 | 150 | 1040 | 3100 | 650 |
| 619/1180F1 | 1180 | 1540 | 160 | 1140 | 3600 | 775 |
| 619/1320F1 | 1320 | 1720 | 128 | 1210 | 4050 | 830 |
| 619/1400F1 | 1400 | 1820 | 185 | 1590 | 5500 | 1250 |
| 619/1500F1 | 1500 | 1950 | 195 | 1720 | 6100 | 1500 |
| 619/1600F1 | 1600 | 2060 | 200 | 1860 | 6950 | 1650 |
| 619/1700F1 | 1700 | 2180 | 212 | 1990 | 7650 | 1950 |
A dash indicates the value is not confirmed in the current catalogue dataset. Matching ISO boundary dimensions alone do not confirm direct interchangeability across brands.
619 vs. 618 selection & scope note: This table lists large-bore open 619 series models (d = 100–1,700 mm); smaller shielded/sealed sizes (2Z/ZZ, 2RS) can be confirmed against your part list upon enquiry. When comparing 618 series and 619 series at identical bore diameters, verify outer diameter (D), width (B), closure type, and radial internal clearance (CN/C3).
Related resources: Read our 618 vs. 619 Thin-Section Deep Groove Ball Bearings Guide and ISO Cross-Reference Guide, or contact ZQM Bearings.
619 Series Featured Products & Engineering Articles
619 Series Selection & Supply FAQ
How many 619 series bearing models are listed, and what bore sizes are covered?
This table lists 56 verified 619 series designations from the ZQM General Catalogue spanning bore diameters from 100 mm to 1700 mm. Open any model row to inspect full boundary dimensions, catalog load ratings, reference mass, and mounting abutments (da min / Da max / ra max).
What design parameters should be confirmed before ordering 619 thin-section ball bearings?
The 619 series thin-section deep groove ball bearings feature a compact cross-section designed for space-constrained housings and larger shaft diameters. Confirm radial clearance, open or sealed/shielded execution, and cage type against your drawing before ordering.
Are 619 series dimensions directly interchangeable with SKF, FAG, NSK, or NTN?
Listed boundary dimensions follow ISO 15 / ISO 104 / ISO 355 nominal envelopes for cross-referencing against SKF, FAG, NSK, and NTN. Because internal roller geometry, cage design, lubrication grooves, and tolerance classes vary by manufacturer, nominal equivalence does not guarantee direct interchangeability — confirm full original designations or drawings before substitution.
How do I request a factory quote or CAD drawing for 619 series bearings?
Backed by our Wafangdian factory, Ningbo export team, and Shanghai consolidation hub, ZQM supports trial orders, mixed-model MRO lists, and scheduled OEM shipments. Submit your designations, bore/clearance specs, quantity, and destination port via our Contact Us page.
Explore More Bearing Series
FROM SPECIFICATION TO SUPPLY
Request a Quotation for 619 Series Bearings
One model or a mixed industrial list. Share your complete designation, clearance, and quantity with ZQM Bearings Wafangdian factory & Ningbo export team.

