ZQM BEARINGS · PRODUCT SERIES
NJ Series Cylindrical Roller Bearings
This page brings together dimensions and catalogue specifications for NJ cylindrical roller bearings (including NJ2, NJ3, NJ10, NJ22, NJ23, and related ISO sub-series). NJ bearings have two integral outer-ring ribs and one inner-ring rib, carrying high radial loads while locating the shaft axially in one direction.

NJ Series Dimensions & Technical Specifications
Select a complete model designation to view all available catalogue specifications. Dimensions in mm; load ratings in kN; mass in kg.
NJ Series Structural Cross-Section Reference
NJ inner ring has one integral rib; verify mounting orientation, Fw envelope, and radial clearance against drawings.
| Model | d / mm | D / mm | B / mm | Cr / kN | Cor / kN | kg |
|---|---|---|---|---|---|---|
| NJ220EM | 100 | 180 | 34 | 190 | 260 | 3.90 |
| NJ2320M | 100 | 215 | 73 | 440 | 630 | 13.5 |
| NJ221M | 105 | 190 | 36 | 210 | 290 | 4.34 |
| NJ1022M | 110 | 170 | 28 | 148 | 203 | 2.39 |
| NJ222M | 110 | 200 | 38 | 255 | 340 | 5.10 |
| NJ322M | 110 | 240 | 50 | 400 | 525 | 11.8 |
| NJ422M | 110 | 280 | 65 | 580 | 735 | 22.3 |
| NJ1024M | 120 | 180 | 28 | 139 | 210 | 3.09 |
| NJ2224M | 120 | 215 | 58 | 430 | 585 | 9.46 |
| NJ224EM | 120 | 215 | 40 | 335 | 420 | 6.72 |
| NJ2324EM | 120 | 260 | 86 | 795 | 1030 | 23.4 |
| NJ424M | 120 | 310 | 72 | 710 | 920 | 29.7 |
| NJ2226EM | 130 | 230 | 64 | 530 | 735 | 12.9 |
| NJ2226X3 | 130 | 240 | 72 | 630 | 850 | 14.8 |
| NJ226EM | 130 | 230 | 40 | 290 | 410 | 7.38 |
| NJ2326EM | 130 | 280 | 93 | 920 | 1230 | 28.9 |
| NJ326EM | 130 | 280 | 58 | 615 | 735 | 19.5 |
| NJ2228M | 140 | 250 | 68 | 475 | 760 | 14.8 |
| NJ228EM | 140 | 250 | 42 | 395 | 515 | 9.43 |
| NJ2328EM | 140 | 300 | 102 | 1020 | 1380 | 41.0 |
| NJ428M | 140 | 360 | 82 | 896 | 998 | 46.3 |
| NJ1030M | 150 | 225 | 35 | 202 | 294 | 5.05 |
| NJ2230EM | 150 | 270 | 73 | 635 | 930 | 21.4 |
| NJ230EM | 150 | 270 | 45 | 450 | 595 | 12.7 |
| NJ2330EM | 150 | 320 | 108 | 1160 | 1600 | 42.4 |
| NJ330EM | 150 | 320 | 65 | 750 | 1020 | 27.2 |
| NJ3330M | 150 | 320 | 128 | 1250 | 1900 | 51 |
| NJ1032M | 160 | 240 | 38 | 238 | 340 | 6.13 |
| NJ232EM | 160 | 290 | 48 | 500 | 665 | 14.6 |
| NJ2932M | 160 | 220 | 36 | 240 | 450 | 4.17 |
| NJ332EM | 160 | 340 | 68 | 860 | 1050 | 33.6 |
| NJ1034M | 170 | 260 | 42 | 287 | 415 | 8.46 |
| NJ2334M | 170 | 360 | 120 | 1220 | 1750 | 64.7 |
| NJ234EM | 170 | 310 | 52 | 475 | 635 | 18.1 |
| NJ334M | 170 | 360 | 72 | 795 | 1010 | 38.4 |
| NJ1036EM | 180 | 280 | 46 | 380 | 565 | 10.8 |
| NJ2236EM | 180 | 320 | 86 | 1010 | 1510 | 31.0 |
| NJ2336M | 180 | 380 | 126 | 1380 | 1990 | 69.5 |
| NJ236EM | 180 | 320 | 52 | 625 | 850 | 18.6 |
| NJ238EM | 190 | 340 | 55 | 695 | 955 | 22.0 |
| NJ338M | 190 | 400 | 78 | 975 | 1260 | 49.4 |
| NJ1040EM | 200 | 310 | 51 | 450 | 720 | 14.7 |
| NJ2240M | 200 | 360 | 98 | 960 | 1600 | 45.5 |
| NJ240EM | 200 | 360 | 58 | 765 | 1060 | 27.1 |
| NJ2940M | 200 | 280 | 48 | 365 | 630 | 9.70 |
| NJ1044M | 220 | 340 | 56 | 500 | 750 | 19.6 |
| NJ2244M | 220 | 400 | 108 | 1140 | 1810 | 63.0 |
| NJ244M | 220 | 400 | 65 | 760 | 1200 | 35.4 |
| NJ2248M | 240 | 440 | 120 | 1440 | 2320 | 86.7 |
| NJ248M | 240 | 440 | 72 | 935 | 1340 | 51.0 |
| NJ1056M | 280 | 420 | 65 | 660 | 1050 | 32.2 |
| NJ1060M | 300 | 460 | 74 | 885 | 1400 | 46.3 |
| NJ1064M | 320 | 480 | 74 | 905 | 1470 | 47.8 |
| NJ1080M | 400 | 600 | 90 | 1360 | 2280 | 90.6 |
| NJ1984M | 420 | 560 | 65 | 830 | 1660 | 47.4 |
| NJ28/530 | 530 | 650 | 72 | 1170 | 2750 | 52.0 |
| NJ10/560 | 560 | 820 | 115 | 2120 | 3980 | 210 |
| NJ18/560 | 560 | 680 | 56 | 780 | 1750 | 44.5 |
| NJ18/670 | 670 | 820 | 69 | 1190 | 2540 | 84.5 |
| NJ18/800 | 800 | 980 | 82 | 1650 | 3980 | 145 |
| NJ28/1000 | 1000 | 1220 | 128 | 3220 | 8880 | 345 |
| NJ18/1120 | 1120 | 1360 | 106 | 3400 | 8500 | 335 |
| NJ18/1180 | 1180 | 1420 | 106 | 2960 | 7180 | 350 |
A dash indicates the value is not confirmed in the current catalogue dataset. Matching ISO boundary dimensions alone do not confirm direct interchangeability across brands.
NJ vs. NU selection & suffixes: Unlike non-locating NU bearings (which accommodate axial shaft displacement in both directions within permissible limits), NJ bearings have a straight cylindrical bore and provide semi-locating axial support in one direction (or bidirectional location when paired with an HJ angle ring). Always distinguish standard M from reinforced high-capacity EM designs, and confirm cage (such as EM or ECP) and radial clearance (C3/C4) suffixes against the manufacturer drawing.
Related resources & featured models: Explore NJ326EM and NJ2326EM, read our NJ/NU/NUP Cylindrical Roller Bearing Guide, or contact ZQM Bearings.
NJ Series Featured Products & Engineering Articles
NJ Series Selection & Supply FAQ
How many NJ series bearing models are listed, and what bore sizes are covered?
This table lists 63 verified NJ series designations from the ZQM General Catalogue spanning bore diameters from 100 mm to 1180 mm. Open any model row to inspect full boundary dimensions, catalog load ratings, reference mass, and mounting abutments (da min / Da max / ra max).
What axial locating structure and bore type do NJ cylindrical roller bearings use?
NJ series single-row cylindrical roller bearings feature two integral outer-ring ribs and one inner-ring rib, allowing semi-locating axial positioning in one direction with a separable cylindrical straight bore (no K tapered bore). Confirm radial clearance (CN/C3/C4) and shoulder abutments (da min / Db min / Da max) prior to assembly.
Are NJ series dimensions directly interchangeable with SKF, FAG, NSK, or NTN?
Listed boundary dimensions follow ISO 15 / ISO 104 / ISO 355 nominal envelopes for cross-referencing against SKF, FAG, NSK, and NTN. Because internal roller geometry, cage design, lubrication grooves, and tolerance classes vary by manufacturer, nominal equivalence does not guarantee direct interchangeability — confirm full original designations or drawings before substitution.
How do I request a factory quote or CAD drawing for NJ series bearings?
Backed by our Wafangdian factory, Ningbo export team, and Shanghai consolidation hub, ZQM supports trial orders, mixed-model MRO lists, and scheduled OEM shipments. Submit your designations, bore/clearance specs, quantity, and destination port via our Contact Us page.
Explore More Bearing Series
FROM SPECIFICATION TO SUPPLY
Request a Quotation for NJ Series Bearings
One model or a mixed industrial list. Share your complete designation, clearance, and quantity with ZQM Bearings Wafangdian factory & Ningbo export team.

