ZQM BEARINGS · PRODUCT SERIES

NJ Series Cylindrical Roller Bearings

This page brings together dimensions and catalogue specifications for NJ cylindrical roller bearings (including NJ2, NJ3, NJ10, NJ22, NJ23, and related ISO sub-series). NJ bearings have two integral outer-ring ribs and one inner-ring rib, carrying high radial loads while locating the shaft axially in one direction.

NJ series cylindrical roller bearing representative image
NJ series representative image · For structural reference
63 ModelsCatalogue Rows Listed
100–1180 mmBore Diameter (d)
Straight · Semi-LocatingBore / Design Feature
ISO 15Boundary Standard
SPECIFICATIONS

NJ Series Dimensions & Technical Specifications

Select a complete model designation to view all available catalogue specifications. Dimensions in mm; load ratings in kN; mass in kg.

NJ Series Structural Cross-Section Reference

NJ inner ring has one integral rib; verify mounting orientation, Fw envelope, and radial clearance against drawings.

FwCylindrical Roller · NJ (Semi-Locating)dDB
NJ Design (2 Outer Ribs + 1 Inner Rib · Semi-Locating)Handles heavy radial loads plus one-direction axial location; add an HJ angle ring for bidirectional location.
FwCylindrical Roller · NUP (Locating)dDB
Comparison: NUP Design (Integral + Loose Flange · Locating)Compare NUP series when compact single-bearing bidirectional axial location is required.

NJ Series Master Size Chart

Source: ZQM Master PDF Catalogue (wp_zqm_models_v1) · ISO 15
Swipe horizontally to view full columns
Modeld / mmD / mmB / mmCr / kNCor / kNkg
NJ220EM100180341902603.90
NJ2320M1002157344063013.5
NJ221M105190362102904.34
NJ1022M110170281482032.39
NJ222M110200382553405.10
NJ322M1102405040052511.8
NJ422M1102806558073522.3
NJ1024M120180281392103.09
NJ2224M120215584305859.46
NJ224EM120215403354206.72
NJ2324EM12026086795103023.4
NJ424M1203107271092029.7
NJ2226EM1302306453073512.9
NJ2226X31302407263085014.8
NJ226EM130230402904107.38
NJ2326EM13028093920123028.9
NJ326EM1302805861573519.5
NJ2228M1402506847576014.8
NJ228EM140250423955159.43
NJ2328EM1403001021020138041.0
NJ428M1403608289699846.3
NJ1030M150225352022945.05
NJ2230EM1502707363593021.4
NJ230EM1502704545059512.7
NJ2330EM1503201081160160042.4
NJ330EM15032065750102027.2
NJ3330M1503201281250190051
NJ1032M160240382383406.13
NJ232EM1602904850066514.6
NJ2932M160220362404504.17
NJ332EM16034068860105033.6
NJ1034M170260422874158.46
NJ2334M1703601201220175064.7
NJ234EM1703105247563518.1
NJ334M17036072795101038.4
NJ1036EM1802804638056510.8
NJ2236EM180320861010151031.0
NJ2336M1803801261380199069.5
NJ236EM1803205262585018.6
NJ238EM1903405569595522.0
NJ338M19040078975126049.4
NJ1040EM2003105145072014.7
NJ2240M20036098960160045.5
NJ240EM20036058765106027.1
NJ2940M200280483656309.70
NJ1044M2203405650075019.6
NJ2244M2204001081140181063.0
NJ244M22040065760120035.4
NJ2248M2404401201440232086.7
NJ248M24044072935134051.0
NJ1056M28042065660105032.2
NJ1060M30046074885140046.3
NJ1064M32048074905147047.8
NJ1080M400600901360228090.6
NJ1984M42056065830166047.4
NJ28/530530650721170275052.0
NJ10/56056082011521203980210
NJ18/56056068056780175044.5
NJ18/670670820691190254084.5
NJ18/8008009808216503980145
NJ28/10001000122012832208880345
NJ18/11201120136010634008500335
NJ18/11801180142010629607180350

A dash indicates the value is not confirmed in the current catalogue dataset. Matching ISO boundary dimensions alone do not confirm direct interchangeability across brands.

NJ vs. NU selection & suffixes: Unlike non-locating NU bearings (which accommodate axial shaft displacement in both directions within permissible limits), NJ bearings have a straight cylindrical bore and provide semi-locating axial support in one direction (or bidirectional location when paired with an HJ angle ring). Always distinguish standard M from reinforced high-capacity EM designs, and confirm cage (such as EM or ECP) and radial clearance (C3/C4) suffixes against the manufacturer drawing.

Related resources & featured models: Explore NJ326EM and NJ2326EM, read our NJ/NU/NUP Cylindrical Roller Bearing Guide, or contact ZQM Bearings.

SERIES FAQ

NJ Series Selection & Supply FAQ

How many NJ series bearing models are listed, and what bore sizes are covered?

This table lists 63 verified NJ series designations from the ZQM General Catalogue spanning bore diameters from 100 mm to 1180 mm. Open any model row to inspect full boundary dimensions, catalog load ratings, reference mass, and mounting abutments (da min / Da max / ra max).

What axial locating structure and bore type do NJ cylindrical roller bearings use?

NJ series single-row cylindrical roller bearings feature two integral outer-ring ribs and one inner-ring rib, allowing semi-locating axial positioning in one direction with a separable cylindrical straight bore (no K tapered bore). Confirm radial clearance (CN/C3/C4) and shoulder abutments (da min / Db min / Da max) prior to assembly.

Are NJ series dimensions directly interchangeable with SKF, FAG, NSK, or NTN?

Listed boundary dimensions follow ISO 15 / ISO 104 / ISO 355 nominal envelopes for cross-referencing against SKF, FAG, NSK, and NTN. Because internal roller geometry, cage design, lubrication grooves, and tolerance classes vary by manufacturer, nominal equivalence does not guarantee direct interchangeability — confirm full original designations or drawings before substitution.

How do I request a factory quote or CAD drawing for NJ series bearings?

Backed by our Wafangdian factory, Ningbo export team, and Shanghai consolidation hub, ZQM supports trial orders, mixed-model MRO lists, and scheduled OEM shipments. Submit your designations, bore/clearance specs, quantity, and destination port via our Contact Us page.

FROM SPECIFICATION TO SUPPLY

Request a Quotation for NJ Series Bearings

One model or a mixed industrial list. Share your complete designation, clearance, and quantity with ZQM Bearings Wafangdian factory & Ningbo export team.

1. Complete DesignationInclude full cage, lube & bore suffixes (CA/W33, EM, K/K30)
2. Bore & ClearanceSpecify straight vs. 1:12 K / 1:30 K30 and CN / C3 / C4
3. Operating ConditionsShare machine position, speed, load & QC documentation
4. Quantity & PackingConfirm trial lot or OEM volume, export crate & destination
Scroll to Top