ZQM BEARINGS · PRODUCT SERIES
231 Series Spherical Roller Bearings
This page provides boundary dimensions and available technical data for 231 series spherical roller bearings. With a heavier cross-section than the 230 series for the same shaft diameter, the 231 series supports higher radial shock loads in mining crushers, vibrating equipment, and heavy industrial drives.

231 Series Dimensions & Technical Specifications
Select a complete model designation to view all available catalogue specifications. Dimensions in mm; load ratings in kN; mass in kg.
231 Series Structural Cross-Section Reference
Standard tapered bore for this series is 1:12 (suffix K) — distinct from the 1:30 taper (K30) used on 240/241 wide series.
| Model | d / mm | D / mm | B / mm | Cr / kN | Cor / kN | kg |
|---|---|---|---|---|---|---|
| 23120CA/W33 | 100 | 165 | 52 | 345 | 530 | 4.38 |
| 23122CA/W33 | 110 | 180 | 56 | 385 | 630 | 5.7 |
| 23124CA/W33 | 120 | 200 | 62 | 465 | 720 | 7.85 |
| 23126CA/W33 | 130 | 210 | 64 | 505 | 825 | 8.69 |
| 23128CA/W33 | 140 | 225 | 68 | 580 | 945 | 10.5 |
| 23130CA/W33 | 150 | 250 | 80 | 725 | 1180 | 15.8 |
| 23132CA/W33 | 160 | 270 | 86 | 855 | 1400 | 20.3 |
| 23134CA/W33 | 170 | 280 | 88 | 940 | 1570 | 21.8 |
| 23136CA/W33 | 180 | 300 | 96 | 1050 | 1760 | 27.5 |
| 23136X2CAD/W33 | 180 | 300 | 125 | 713 | 1200 | 30 |
| 23138CA/W33 | 190 | 320 | 104 | 1190 | 2020 | 34.5 |
| 23140CA/W33 | 200 | 340 | 112 | 1360 | 2330 | 42.7 |
| 23144CA/W33 | 220 | 370 | 120 | 1570 | 2710 | 53 |
| 23148CA/W33 | 240 | 400 | 128 | 1790 | 3100 | 66.9 |
| 23152CA/W33 | 260 | 440 | 144 | 2160 | 3750 | 88.2 |
| 23156CA/W33 | 280 | 460 | 146 | 2230 | 4000 | 94.3 |
| 23160CA/W33 | 300 | 500 | 160 | 2670 | 4800 | 125 |
| 23160CAD/W33 | 300 | 500 | 240 | 2710 | 4900 | 150 |
| 23164CA/W33 | 320 | 540 | 176 | 3050 | 5500 | 162 |
| 23168CA/W33 | 340 | 580 | 190 | 3600 | 6600 | 206 |
| 23172CA/W33 | 360 | 600 | 192 | 3800 | 7100 | 217 |
| 23176CA/W33 | 380 | 620 | 194 | 4000 | 7600 | 229 |
| 23180CA/W33 | 400 | 650 | 200 | 4150 | 7900 | 257 |
| 23184CA/W33 | 420 | 700 | 224 | 5000 | 9400 | 341 |
| 23188CAF3/W33 | 440 | 720 | 226 | 5300 | 10300 | 360 |
| 23192CAF3/W33 | 460 | 760 | 240 | 5700 | 10900 | 423 |
| 23196CAF3/W33 | 480 | 790 | 248 | 6050 | 11700 | 475 |
| 231/500CAF3/W33 | 500 | 830 | 264 | 6850 | 13400 | 567 |
| 231/530CAF3/W33 | 530 | 870 | 272 | 7150 | 14100 | 628 |
| 231/560CAF3/W33 | 560 | 920 | 280 | 7850 | 15500 | 727 |
| 231/600CAF3/W33 | 600 | 980 | 300 | 8750 | 17500 | 898 |
| 231/630CAF3/W33 | 630 | 1030 | 315 | 9600 | 19400 | 1040 |
| 231/670CAF3/W33 | 670 | 1090 | 336 | 10600 | 21600 | 1230 |
| 231/710CAF3/W33 | 710 | 1150 | 345 | 11800 | 24500 | 1420 |
| 231/750CAF3/W33 | 750 | 1220 | 365 | 13100 | 27300 | 1700 |
| 231/800CAF3/W33 | 800 | 1280 | 375 | 13800 | 29200 | 1870 |
| 231/850CAF3/W33 | 850 | 1360 | 400 | 15800 | 34000 | 2260 |
| 231/900CAF3/W33 | 900 | 1420 | 412 | 17000 | 37000 | 2490 |
| 231/1000CAF3/W33 | 1000 | 1580 | 462 | 20330 | 45600 | 3500 |
A dash indicates the value is not confirmed in the current catalogue dataset. Matching ISO boundary dimensions alone do not confirm direct interchangeability across brands.
Bore taper & engineering check: Tapered-bore 231 series bearings use a 1:12 taper (suffix K). Because operating speed, thermal expansion, and shock vibration strongly influence internal clearance selection, confirm CN, C3, or C4 clearance and cage construction suffixes (CA/MB/CC/CAF3—verify material per drawing) prior to sourcing.
Related resources & featured models: See 23160 CA/W33, compare 230 Series and 232 Series, read our Cage Design Guide, or contact ZQM Bearings.
231 Series Featured Products & Engineering Articles
231 Series Selection & Supply FAQ
How many 231 series bearing models are listed, and what bore sizes are covered?
This table lists 39 verified 231 series designations from the ZQM General Catalogue spanning bore diameters from 100 mm to 1000 mm. Open any model row to inspect full boundary dimensions, catalog load ratings, reference mass, and mounting abutments (da min / Da max / ra max).
What bore taper (K 1:12 vs K30) and clearance options apply to the 231 series?
Standard 231 series spherical roller bearings use cylindrical bore or 1:12 tapered bore (suffix K, compatible with standard H-series adapter sleeves where applicable; 1:30 K30 applies only to 240/241 series). Always verify radial clearance (CN, C3, C4) and cage design against the catalog or drawing.
Are 231 series dimensions directly interchangeable with SKF, FAG, NSK, or NTN?
Listed boundary dimensions follow ISO 15 / ISO 104 / ISO 355 nominal envelopes for cross-referencing against SKF, FAG, NSK, and NTN. Because internal roller geometry, cage design, lubrication grooves, and tolerance classes vary by manufacturer, nominal equivalence does not guarantee direct interchangeability — confirm full original designations or drawings before substitution.
How do I request a factory quote or CAD drawing for 231 series bearings?
Backed by our Wafangdian factory, Ningbo export team, and Shanghai consolidation hub, ZQM supports trial orders, mixed-model MRO lists, and scheduled OEM shipments. Submit your designations, bore/clearance specs, quantity, and destination port via our Contact Us page.
Explore More Bearing Series
FROM SPECIFICATION TO SUPPLY
Request a Quotation for 231 Series Bearings
One model or a mixed industrial list. Share your complete designation, clearance, and quantity with ZQM Bearings Wafangdian factory & Ningbo export team.

