ZQM BEARINGS · PRODUCT SERIES

619 Series Deep Groove Ball Bearings

This page lists boundary dimensions and catalogue technical data for 619 series (also referenced as 6900 series in some manufacturer designations) thin-section deep groove ball bearings. Offering greater cross-section and load capacity than the ultra-thin 618 series, the 619 series fits compact precision housings and industrial drives.

619 series thin-section deep groove ball bearing reference
619 series representative image · For structural reference
56 ModelsCatalogue Rows Listed
100–1700 mmBore Diameter (d)
ISO Standard SeriesBore / Design Feature
ISO 15Boundary Standard
SPECIFICATIONS

619 Series Dimensions & Technical Specifications

Select a complete model designation to view all available catalogue specifications. Dimensions in mm; load ratings in kN; mass in kg.

619 Series Structural Cross-Section Reference

Deep Groove Ball BearingdDB
619 Series Thin-Section Deep Groove Ball (ISO 15)Low radial cross-section height conserves housing envelope while supporting smooth medium-to-high speed rotation.

619 Series Master Size Chart

Source: ZQM Master PDF Catalogue (wp_zqm_models_v1) · ISO 15
Swipe horizontally to view full columns
Modeld / mmD / mmB / mmCr / kNCor / kNkg
61920M1001402042410.96
619221101502043450.90
61924M1201652253541.54
61926M1301802465671.92
61928MA1401902466721.7
619301502102885913.05
61932MA1602202887963.25
61934MA1702302889100—
61936MA180250331191285.27
61938MA190260331131275.25
61938X1M190269.5331271386.87
61940MA200280381431587.40
61940X1M-1200279.5381431587.25
61940X1M-2200289.5381631808.70
61944MA220300381461697.96
61944X1M220309.5381511809.3
61946X3M230329.54019022811.6
61948MA240320381541908.57
61952M2603604620425514.5
61952X1M-12603704621227016.6
61952X1M-2260369.54621227016.5
61956MA2803804620927215.6
61956X1M-12803904621628517.6
61956X1M-2280389.54621628517.6
619603004205627037524.5
61960X1300419.55627037520.6
619643204405626637525.7
619683404605628042527.1
619723604805628042529.3
619763805206532551040.0
619804005406533554042.0
619844205606534057043.0
619884406007439568060.2
619924606207440572068.3
619964806507845081580.0
619/500F15006707846086577.0
619/530F15307108245587089.8
619/560F1560750855251040105
619/600F1600800905501160120
619/630F16308501006251350163
619/670F16709001036751460181
619/710F17109501067151640208
619/750F175010001127851840245
619/800F180010601158252050275
619/850F185011201188322160310
619/900F190011801228522280350
619/950F1950125013210102800390
619/1000F11000132014010102800515
619/1060F11060140015010103000620
619/1120F11120146015010403100650
619/1180F11180154016011403600775
619/1320F11320172012812104050830
619/1400F114001820185159055001250
619/1500F115001950195172061001500
619/1600F116002060200186069501650
619/1700F117002180212199076501950

A dash indicates the value is not confirmed in the current catalogue dataset. Matching ISO boundary dimensions alone do not confirm direct interchangeability across brands.

619 vs. 618 selection & scope note: This table lists large-bore open 619 series models (d = 100–1,700 mm); smaller shielded/sealed sizes (2Z/ZZ, 2RS) can be confirmed against your part list upon enquiry. When comparing 618 series and 619 series at identical bore diameters, verify outer diameter (D), width (B), closure type, and radial internal clearance (CN/C3).

Related resources: Read our 618 vs. 619 Thin-Section Deep Groove Ball Bearings Guide and ISO Cross-Reference Guide, or contact ZQM Bearings.

SERIES FAQ

619 Series Selection & Supply FAQ

How many 619 series bearing models are listed, and what bore sizes are covered?

This table lists 56 verified 619 series designations from the ZQM General Catalogue spanning bore diameters from 100 mm to 1700 mm. Open any model row to inspect full boundary dimensions, catalog load ratings, reference mass, and mounting abutments (da min / Da max / ra max).

What design parameters should be confirmed before ordering 619 thin-section ball bearings?

The 619 series thin-section deep groove ball bearings feature a compact cross-section designed for space-constrained housings and larger shaft diameters. Confirm radial clearance, open or sealed/shielded execution, and cage type against your drawing before ordering.

Are 619 series dimensions directly interchangeable with SKF, FAG, NSK, or NTN?

Listed boundary dimensions follow ISO 15 / ISO 104 / ISO 355 nominal envelopes for cross-referencing against SKF, FAG, NSK, and NTN. Because internal roller geometry, cage design, lubrication grooves, and tolerance classes vary by manufacturer, nominal equivalence does not guarantee direct interchangeability — confirm full original designations or drawings before substitution.

How do I request a factory quote or CAD drawing for 619 series bearings?

Backed by our Wafangdian factory, Ningbo export team, and Shanghai consolidation hub, ZQM supports trial orders, mixed-model MRO lists, and scheduled OEM shipments. Submit your designations, bore/clearance specs, quantity, and destination port via our Contact Us page.

FROM SPECIFICATION TO SUPPLY

Request a Quotation for 619 Series Bearings

One model or a mixed industrial list. Share your complete designation, clearance, and quantity with ZQM Bearings Wafangdian factory & Ningbo export team.

1. Complete DesignationInclude full cage, lube & bore suffixes (CA/W33, EM, K/K30)
2. Bore & ClearanceSpecify straight vs. 1:12 K / 1:30 K30 and CN / C3 / C4
3. Operating ConditionsShare machine position, speed, load & QC documentation
4. Quantity & PackingConfirm trial lot or OEM volume, export crate & destination
Scroll to Top