ZQM BEARINGS · PRODUCT SERIES
294 Series Spherical Roller Thrust Bearings
This page provides ISO 104 boundary dimensions (d × D × H) and reference mass for 294 series spherical roller thrust bearings. Built with asymmetric barrel-shaped rollers and a sphered housing washer raceway, the 294 series accommodates extreme axial loads alongside shaft deflection in vertical pumps, extruders, marine drives, and hydro turbines.

294 Series Dimensions & Technical Specifications
Select a complete model designation to view confirmed boundary dimensions and reference mass. Dimensions in mm (H = total height, C = housing washer height); mass in kg. Basic axial load ratings (Ca / C0a) in kN; confirm final tolerances and lubrication against drawings.
294 Series Structural Cross-Section Reference
| Model | d / mm | D / mm | H / mm | C / mm | Ca / kN | C0a / kN | kg |
|---|---|---|---|---|---|---|---|
| 29420 | 100 | 210 | 67 | 33 | 840 | 2400 | 10.5 |
| 29422 | 110 | 230 | 73 | 34.4 | 1010 | 2930 | 18.1 |
| 29424 | 120 | 250 | 78 | 37 | 1160 | 3400 | 17.1 |
| 29426 | 130 | 270 | 85 | 39.7 | 1330 | 3900 | 28.3 |
| 29428 | 140 | 280 | 85 | 42 | 1370 | 4200 | 22.2 |
| 29430 | 150 | 300 | 90 | 44 | 1580 | 4900 | 27.9 |
| 29432 | 160 | 320 | 95 | 46.9 | 1740 | 5400 | 32.8 |
| 29434 | 170 | 340 | 103 | 50 | 1680 | 5800 | 39.7 |
| 29436 | 180 | 360 | 109 | 51.2 | 1870 | 6500 | 64.2 |
| 29438 | 190 | 380 | 115 | 53.7 | 2100 | 7450 | 75.6 |
| 29440 | 200 | 400 | 122 | 56.7 | 2290 | 8150 | 83.5 |
| 29444 | 220 | 420 | 122 | 58 | 2350 | 8650 | 74.0 |
| 29448 | 240 | 440 | 122 | 60 | 2420 | 9100 | 96.1 |
| 29452 | 260 | 480 | 132 | 63 | 2820 | 10700 | 101.5 |
| 29456 | 280 | 520 | 145 | 68 | 3400 | 13100 | 134 |
| 29460 | 300 | 540 | 145 | 70 | 3500 | 13700 | 140.0 |
| 29464 | 320 | 580 | 155 | 75 | 3650 | 14600 | 178 |
| 29468 | 340 | 620 | 170 | 80 | 4400 | 17400 | 218 |
| 29472 | 360 | 640 | 170 | 83.5 | 5200 | 21000 | 230 |
| 29476 | 380 | 670 | 175 | 87.5 | 5800 | 24000 | 260 |
| 29480 | 400 | 710 | 185 | 89.5 | 6350 | 26100 | 310 |
| 29484 | 420 | 730 | 185 | 90.5 | 6650 | 27500 | 323 |
| 29488 | 440 | 780 | 206 | 101 | 7550 | 32000 | 410 |
| 29488/HV | 440 | 780 | 206 | 100 | 7880 | 34000 | 346.6 |
| 29492 | 460 | 800 | 206 | 100 | 6900 | 28300 | 420 |
| 29496 | 480 | 850 | 224 | 108 | 7200 | 31000 | 545 |
| 294/500 | 500 | 870 | 224 | 107 | 7850 | 33000 | 589 |
| 294/530 | 530 | 920 | 236 | 114 | 8550 | 37000 | 660 |
| 294/560 | 560 | 980 | 250 | 124 | 9600 | 42000 | 800 |
| 294/560/HV | 560 | 980 | 250 | 122 | 12000 | 51000 | 674 |
| 294/600 | 600 | 1030 | 258 | 127 | 10100 | 43000 | 895 |
| 294/630 | 630 | 1090 | 280 | 136 | 11600 | 51500 | 1100 |
| 294/630EM | 630 | 1090 | 280 | 137 | — | — | 989 |
| 294/670 | 670 | 1150 | 290 | 140 | 12500 | 56000 | 1250 |
| 294/710 | 710 | 1220 | 308 | 148 | 14300 | 65500 | 1500 |
| 294/750 | 750 | 1280 | 315 | 152 | 15100 | 69000 | 1680 |
| 294/800 | 800 | 1360 | 335 | 162 | 16600 | 77500 | 2010 |
| 294/800A | 800 | 1360 | 335 | 165 | 20200 | 93000 | 1658 |
| 294/850 | 850 | 1440 | 355 | 172 | 18700 | 99000 | 2350 |
| 294/900 | 900 | 1520 | 372 | 185 | 22200 | 121000 | 2760 |
| 294/950 | 950 | 1600 | 390 | 191 | 28200 | — | 3065 |
A dash indicates the value is not confirmed in the current catalogue dataset. Matching ISO boundary dimensions alone do not confirm direct interchangeability across brands.
Engineering & lubrication notes: Spherical roller thrust bearings normally require oil lubrication due to sliding contact between roller ends and the shaft washer guide flange, and must maintain sufficient minimum axial load during operation to prevent roller skidding. Confirm cage/design suffixes (such as E or EM, verifying actual cage material per manufacturer specification) and mating shaft/housing shoulder diameters before ordering.
Related resources & featured models: View 29426 EM Spherical Roller Thrust Bearing, read our 29000 Series Spherical Roller Thrust Bearing Guide, or contact ZQM Bearings.
294 Series Featured Products & Engineering Articles
294 Series Selection & Supply FAQ
How many 294 series bearing models are listed, and what bore sizes are covered?
This table lists 41 verified 294 series designations from the ZQM General Catalogue spanning bore diameters from 100 mm to 950 mm. Open any model row to inspect full boundary dimensions, catalog load ratings, reference mass, and mounting abutments (da min / Da max / ra max).
How should height H, axial ratings (Ca / C0a) and lubrication be checked for 294 thrust bearings?
The 294 series spherical roller thrust bearings support heavy axial loads and moderate radial loads simultaneously; catalog load values represent basic dynamic axial (Ca) and static axial (C0a) ratings, and total height H is the key axial envelope dimension. Verify minimum axial load and oil lubrication conditions for reliable roller contact.
Are 294 series dimensions directly interchangeable with SKF, FAG, NSK, or NTN?
Listed boundary dimensions follow ISO 15 / ISO 104 / ISO 355 nominal envelopes for cross-referencing against SKF, FAG, NSK, and NTN. Because internal roller geometry, cage design, lubrication grooves, and tolerance classes vary by manufacturer, nominal equivalence does not guarantee direct interchangeability — confirm full original designations or drawings before substitution.
How do I request a factory quote or CAD drawing for 294 series bearings?
Backed by our Wafangdian factory, Ningbo export team, and Shanghai consolidation hub, ZQM supports trial orders, mixed-model MRO lists, and scheduled OEM shipments. Submit your designations, bore/clearance specs, quantity, and destination port via our Contact Us page.
Explore More Bearing Series
FROM SPECIFICATION TO SUPPLY
Request a Quotation for 294 Series Bearings
One model or a mixed industrial list. Share your complete designation, clearance, and quantity with ZQM Bearings Wafangdian factory & Ningbo export team.

